Routing

I have two Cisco 1300 Access Points that are acting as bridges. Each is at a different site.Each site is in its own VTP domain, with the core switch (a 3000 series L2/L3) acting as a VTP Server and all other switches as clients.The switch at either s...

Hello, I am not a routing professional of any sort so please bare with me. I am looking for a lower cost Cisco router that is capable of routing multiple static WAN IPs to predetermined local IPs (the specific webserver(s) and associated virtual IPs ...

Hello all,I'm having problem with ISDN backup on 2 routers (same platform, same IOS but different errors). Everytime I try to place calls (via interesting traffic or "isdn test call interface") I get following message from debug:Aug 24 11:21:50.482 M...

Hello All, I have a question concerning hte checking of the MD5 value on a CRS. On other routers that i am more familiar with i would use the : verify /md5 disk0: <word> command but i cant seem to find the equivalent on the CRS. Any help is greatly a...

Can subinterfaces be created and assigned to VLANs on the WAN ports of an 1811 router? I know they can be created on an 1841. Thank you for your response.

When you have a router in the field, is there a way (show command) to know if a serial intervace is a serial needing CAB-V35MT cable....or if its a Smart Serial...calling for a different cable (CAB-SSV35MT)

Hello All,When i execute "show buffers" command in my 7206 VXR Router i see huge amount of Failures, Misses, etc., in Small, Middle and Big Buffers.Can anyone provide / tell me the Command to Clear these Buffer Failures errors in Router.I am aware th...

I need a clarification reg 3750-48 port switch.With default ram and settings, can i use this switch in a production environment to run bgp?any considerations?Possiblity 1.Full internet routing table may flow in near future.2.PVLAN and multiple trunks...

A question here. I have configured a policy map, although the packet value does get incremented at the class-map but the traffic that is policed is not being conformed. Any ideas? policy-map test class test police cir 256000 conform-action set...

My company recently upgraded our old switches to CE500... we have offices spread over a large geographical location. since we don't have a budget for an SPF we used our old Media Converters (100Mbps) connected to the gigabit port(s)... My problem is ...

We are setting up a connection between our primary site and a replication site. I have setup a router at each site and they connect via a T1. I now have connectivity between the two sites, but I want to implement security between the two sites to l...