Routing

Hi,I have 2 ISP;ISP A; 1 x T1ISP B; 5mb ethernet connection.Current configurattion;ISP A --> 2611-rtr -> T1 Se 0/0ISP B --> 2611-rtr -> fa0/12611-rtr -> fa0/0 - Pix-525PIX525 running PAT;- Not running any routing protocol on the router, everyting is ...

Is there any way i can use ASA 5510 (software version 7.2(2)) as PPPOA client?I can see the only PPPOE option in ASDM.thanks

Anyone know of object tracking for two ISP links is supported on an 1841?

r31 get route for r32. from "sh ip bgp" but r31 think the route (10.0.0.0), is igbp route and dont advertising to R1. How to fix the problem? The attachment is diagram. I use "no sy" under each router bgp protocol R31 "sh ip bgp"* i9.0.0.0,192.168.10...

Hi,Does anyone have a workaround , or another ios that works ?"packets get process switched instead of fast switched whentesting IKE/IPSEC. "We're running c870-adventerprisek9-mz.124-9.T1.bin, and I can't se that packets are cef switched.BR,Bjornarsb

Hi all,I have cisco 1800 series router ,we need to configure 3 serial (v.35 ) input each of 2mbps data coming from service provider to configure to use 6 mbps circuit , and the routing on eigrp to connect two branch offices, Can anyone help out , how...

hai all1. if an eigrp router which have no downstream neigbor (leaf router ) receives a query and if the router dont have a feasible successor,then it would give an eigrp reply with the route as unreachable.(a)will the router then remove the route ...

Please help to load IOS image to my 3725 router from rom monitor mode.It is very urgent.Thanks in advance

Hi,I want to install a new card (NM-1T3/E3) in the 7206VXR. Is the 7206VXR hot swappable?ThanksSAM

Please refer to my simple diagram.Network 1 reaches Network 3, 4 and unknown networks via link 1 only. If link 1 fails, it should use Link 2 as the back up link. The same applies to Network 2. Network 2 should only use Link 2. How do I design my ...

Hi,I would like to enable Jumbo frame (>9000 bytes) at my WAN links (POS interface). What would be the recommended MTU for jumbo? Thanks,--mazlan

Please, I like a definite answer; Is true that each time a candidate sends wrong CLI cmd on the simulation of CCNA exam, some certain points are deducted?