I am having never ending problems with my DMVPN tunnel protection setup. It started with the spokes not recognizing the tunnel as down, I couldn't find a way to do keepalives or DPD. Then I started having issues where the tunnel would just stay in NH...
In a Multi homed network when 2 CE's (CE1 and CE2) are connected to 2 PE's (PE1 and PE2). At LAN Side both CE's are connected through a switch. To do Load balancing/Redundancy which protocol would be best. All of 2 CE's and 1 switch are in same AS( A...
hi,we currently just monitor ASR1K CPU and memory and temperature sensor, which i believe is the default in solarwinds NPM.i need to add monitoring to ASRK1 power supply, fan and other modules. i tried to do an SNMP walk using an open source tool but...
An issue came While practicing for Route-reflector with R1, R2, R3, R4 in AS 111, R5 in AS 555 and R6 in AS.
All the routes are being advertised to all the neighbor but the routes learned from RR is not installed as the best one.
I issued Next hop s...
Hello,I just wanted to ask if there a possibility to configure SSL VPN in Cisco Packet Tracer on such a routers like 1841, 2811 or 2620 or if there is a possibility at all. Tried to configure it somehow, but some commands are not avaliable. Cheers
I want to implement OTV in my network with the ASR routers. But as usual, I am testing and studying it in my VIRL lab first. First of all, there is no ASR in VIRL. I am using CSR instead. I am assuming that the behavior would be the same between the ...
Hello all haven't been here for a long time but now need your assistance once again. My current config is working fine but I need to add a public addressable website which resides on my private lan address.I found "Configuring Network Address Transla...
Hi thereI just bought a used RV130W.My goal is to use it as a Switch/AP if possible.So far however this has proven difficult, this might be because it's not possible, or because the onlyknowledge I have of networking is mostly theoretical. Why do I w...
Hi usually we use bgp attribute as-path and local preference for load balance between two ISPs. If we add SD-WAN in the network, I wonder if SD-WAN would do better load balance between two ISP than the original as-path and local preference? Thank you...
I have a legacy network that has a dual hub setup and 4 spokes that are connected together over a local ISP. The network is a enterprise network with OSPF as the IGP and MPLS running over the top. The issue I'm running into with this existing conf...
Hi,Need clarification that two routers know they’re the only OSPF routers on the link and so they exchange routes with each other.As per below config can R1 (10.1.1.2) will be able to talk with R4 (10.1.1.14), as they are in same OSPF AREA 0.If not t...
This link gives examples of license activation. What's interesting is that it talks about a "Memory Evaluation License". I know that you can buy additional memory for the ISR G2 router like the 2951, but I had no idea you had to purchase a memory lic...
Hola a todos soy nueva en el foro este es miprimer post, espero puedan ayudarme, soy nueva en el tema de las Access-List así que aquí les expongo mi problema1) necesito dar acceso a toda (cualquier cosa)la red mediante una Vlan (es la vlan del dpto d...
