Hello everyone,I'm trying to create gre-tunnel over cisco isr4351 with template in vmanage. but after searching and watching related videos it's possible to create gre's only over vedge and vedge-cloud routers. But there isn't any similar template fo...
Forum Posts
Hi, There is office movement where vEdge was running and I expect the IP address on the new Internet line on the new office will be different from the old IP address.So vEdge device can't be online with controller as it still has the old Internet IP ...
Hello everybody,I have created my own sdwan lab with viptela vedges. I am trying to multicast routing on Service VPN ( vpn1) as described here https://www.cisco.com/c/en/us/support/docs/routers/sd-wan/215104-configure-and-verify-vedge-multicast-ove.h...
Hi guysI am using version 20.1.6, with cEdge ISR4331. I deploy AAR follow this guide:https://www.cisco.com/c/en/us/td/docs/solutions/CVD/SDWAN/cisco-sdwan-application-aware-routing-deploy-guide.html#ProcessMonitortheWANtransportpathcharacteristics My...
Hi guysI have bellow topology. I concern that load-balancing and 2 internet connections can cause any issue with IPsec tunnel ?. Because sometime I see cEdge down in vManage, although 2 internet line is ok.
Hi together, I have a problem with the vManage VM. I have an ESXI with the vManage. I did the following steps installing vManage: https://sdwan-docs.cisco.com/Product_Documentation/Getting_Started/Viptela_Overlay_Network_Bringup/03Deploy_the_vM...
Hi guys, I would like an opinion on a case, please. I need to close a VPN tunnel (site-to-site) between the ASA of SITE-A with the ASA of SITE-B, but in SITE-B we have a scenario with Cisco SD-WAN. On SITE-B the ASA is behind the Cisco SD-WAN. I noti...
Hi friends,can you please help me to understand the Tunnel concept use in the SDWAN.1.What is the tunnel source address ? (is it physical IP address bound with the tunnel)2.What is the tunnel IP address ? (is it the system IP)3.WAN-Edge device use s...
First, according to several of Cisco documents (v19.x and v20.x), some state "You can only activate ONE centrailized policy" while others state "you can have one control-policy and one data-policy activated (e.g. one inbound; one outbound"... So whic...
I have a situation were the status of ipsec sdwan tunnel shows up on the router CLI but when monitoring the tunnel from vmanage 20.3.3.1 GUI (SDWAN router ios-xe 17.3.4a) it shows down .... even though statistics and application monitoring are all be...
Hi guysI am using version 20.1.6 and sometimes a I got account locked error although I don't input wrong password. This time it happen with vManage & vSmart. I have noway to fix it, just waiting they are unlocked.
Built a lab to test out how vManage pushes alarm notifications to a webhook server. All is good when using simple http, but when using https with a dummy certficiate vManage breaks the connection with a TLS alert 46 - Certificate Unknown. Is there a ...
When using the Viptela SDWAN API, I came failure message saying "Processing timeout. Failed to Configuring device with CLI template". I'm trying to attach my device template to a vEdge. What should I do?
Hi guysI am testing SDWAN with 2 cEdge ISR4331. Both of them use G0/0/0.3 for Internet tunnel and G0/0/0.4 for MPLS tunnel. From vManage, I want to see the interfaces traffic for each tunnel, but it only show traffic on G0/0/0. How can you resolve th...
Hi There,My requirement is to connect peered aws vpc from on premiseswe have vpc A and vpc B peered, If i deploy vEdge cloud router in vpc A , can i access vpc B from on premisesThanks
