Remove
Remove
Forum Posts
Resolved! Branch local Internet - how is bandwidth controlled?
I've read through the CVD for setting up spoke routers to utilize a branch's local ISP connection for designated local applications, and it seems that this application traffic would not be passing through a tunnel where CBWFQ guarantees percentages o...
Viptela SD-WAN per-tunnel qos, support of 802.1q sub-iterfaces
Hello experts,I am trying to configure per-tunnel qos feature on the HUB router (ASR1001X, IOS-XE 17.03.02). In my case, TLOC is 802.1q ethernet sub-interface.I see that the correct policy-map has been created on the HUB, but it has not been applied ...
viptela BFD/IPsec weird behavior
Hi, I am having a weird problem I can not explain, and need your input to solve this mystery. I have a viptela vedge connected to a Juniper EX switch/router that is the gateway to Internet, this vEdge router has many inbound/outbound IPsec connection...
Sdwan asr1002hx enterprise CA CSR
Hi all, please had anybody succesfully onboarded to on-premise sdwan controllers v 20.3.2 (or lower) an ASR1002hx router with enterprise CA?i have tried manual onboarding, also multiple times bootstrap onboarding with root ca included in bootstrap, r...
How to search in SD-WAN API Docs
Dear community,I am new to programming/APIs and I'm working on some SD-WAN automation but I'm having hard time searching in SD-WAN API Docs (https://vmanageIP/apidocs) for the correct API I need for several use cases.For example I want to pull the ro...
How to manually install root PKI?
Hi, I'm hitting a new bug:Cisco PKI Root Certificates not Installed on 16.x RoutersCSCvr71672 Symptom:CRTVERFL error during plug-and-play (PnP) process with cEdge Router.'Show sdwan cert root-ca-cert' on the router does not show a Cisco CA.Condition...
Control Connections from private transport via NAT through another vEdge Router
Hello, I do have a relatively simple SDWAN fabric that includes a public-internet line and a private line for all sites in the transport VPN0. The controllers are cloud hosted from Cisco within Azure DC and the private line does not have a connectio...
Resolved! Tunnelled Interface prevents ping
Simple drawing attached. I have 2 regular routers and a IOS XE router. With "regular routing" I can ping 100,000 pings from 2.2.2.2 to 1.1.1.2. (without Tunneled Interface applied)I have read that all interfaces on an IOS XE router are in VPN 0. ...
SDWAN-On Premises-SETUP
Dear Community , I have one doubt with SDWAN - Setup on premises as i read some docs that we need Public IP For Vbond ( it can be NAT when we use on premises ) , but me Question is after Vedge is authenticated by Vbond and DTLS is completed then Next...
SDWAN Use cases
Hi Expert, I am novice in SD-WAN Viptela, recently i am trying to make some use cases like policy implementation, making device templates, App Aware policy, DPI, hub spoke topology etc, means all the possible use cases. Could you please guide me and...
how to rollback SDWAN config to non-SDWAN confg
Hi, what if during a migration you need to rollback the SDWAN config to the previous non-sdwan config. (Note that I'm not talking about the IOS software, just the config). Just detaching the device won't help as the SDWAN-config will stay in place (a...
Resolved! Can we use VPN0 for In band management for v Edges?
Hi everybody,I am just start learning about Viptel SD WAN , can we use VPN0 for in-band management for vedges?Thanks
Resolved! Remove
Remove
VAnalytics and on-prem solution
Hi everybody,Cisco provides VAnalytics as a hosted solution where Cisco provides all controllers on its cloud and customer devices such as vedges can talk to them over internet.Is there any plan from Cisco to provide VAnalytics as on-prem solution? ...
Recognize Your Peers
