Activity in Security
SNA Policy Rules
I have a number of devices that send telemetry to Microsoft. These devices are triggering High File Sharing Index alert. I've managed to filter down the MS telemetry IP ranges and put them in a host group but can't filter the alarm. When can select...
Management VPN with full tunnel during ASA-to-FTD migration
Dear all,We are migrating our remote-access VPN configuration from ASA to FTD managed by FMC.Our current ASA configuration uses a Management VPN Tunnel in full-tunnel mode, enabled through the AnyConnect custom attribute described here:Configure a Cu...
Resolved! ISE Posture update issue
Hello mates,I’ve seen this error while trying to do a posture update: “Feed cannot be generated or parsed”:We have it for two weeks now and we patched our deployment yesterday but the issue is still here. When I try a to update now, I see my proxy go...
Secure Access: Europe (Germany and The Netherlands) region rename
In preparation for the launch of our new data center in Amsterdam, we have renamed the Europe (Germany) region to Europe (Germany and The Netherlands). The name change is effective immediately and precedes the Amsterdam data center launch.This is a n...
False positive block for ssba.com
Like so, so many others on this forum, my site is also suddenly blocked for phishing. My site has good reputation, not on other blocklists, and a search for unusual network activity/viruses turned up nothing. OpenDNS, please unblock SSBA.com ASAP. Yo...
OpenDNS static IP inactive; originid 0 and filtering not applied
Hi Cisco/OpenDNS team,My OpenDNS Home static IPv4 registration became "Inactive" despite dynamic IP updates always being disabled. I re-added it; the dashboard now shows the old inactive entry and a new entry displaying the correct IP. Dynamic update...
Firewall Migration tool not showing all FTD's from FMC
Hi All, I am migrating a ASA firewall 5505 with version 9.1(7)32 to Cisco FTD 1120 managed by FMC 7.4.8. When I am adding the FMC credentials in the FMT, it fetches the Firewall list of all managed Firewalls. I have around 290 FTDs managed by this F...
Does isCompliant require an MDM integration in ISE ?
Does isCompliant require an MDM integration in ISE (an MDM server entry under Administration > Network Resources > External MDM) to return a value, or can it be retrieved through the identity source connection alone?To note this attribute is a Device...
FTD 1010 Managed via cdFMC - Health alert for Management0 interface
Hi all,I am currently dealing with a FTD 1010 on version 7.6.4 managed by cdFMC via its external data interface. My issue is, the management0 logical interface is kicking up a fuss because its not receiving any packets but this is to be expected as w...
"The installer detected incorrect number of CPU CORES" on SNS3700/3800
Symptoms • Application Startup Failure: Cisco ISE application services fail to start following a reboot or maintenance cycle. • Integrity Check Error in Logs:INFO [main] cisco.cpm.nsf.api.PasswordValidator - Signature verification failed for Integri...
TEAP - Windows 11 and ISE version 3.4
We are troubleshooting Windows 11 native wired 802.1X using TEAP with EAP-TLS chaining against Cisco ISE 3.4. We are trying to determine whether anyone has successfully implemented the same configuration or has encountered similar Windows supplicant ...
Cisco Secure Client/XDR/MS Intune
ObjectiveThe goal of this guide is to show how to deploy Cisco Secure Client (formerly AnyConnect) through Microsoft Intune by using the Microsoft Win32 Content Prep Tool to prepare the installer package.Note: This process deploys the initial install...
Validation Error after successful DUO authentication
We have two FTD 1140n 's(version 7.2.5) in an HA being managed by a FMCv (verion 7.2.5.1) We are using AnyConnect version 4.10.08025 for VPN clients. We setup DUO SSO and it is working fine with one of the two vpn connection profiles we use. We get a...
DNS-O-Matic & Dynamic DNS
So, I've got an email today, as, I suspect, has everyone else - that DNS-O-Matic dies in 30 days.My OpenDNS is tied into DNS-O-Matic.So, no worries, think I - I'll check what options I have - so into OpenDNS, Dashboard, Advanced Settings - and lo, "D...
PRTG vs. ASA
Introduction We will examine the interaction between a Cisco Adaptive Security Appliance (ASA) and a popular network management system, PRTG. Specifically we are focusing on the use of Simple Network Management Protocol (SNMP) to manage the ASA and ...
| User | Helpful Count |
|---|---|
| 14 | |
| 13 | |
| 13 | |
| 7 | |
| 6 |
