Switches - Small Business

On an SG300 switch, is it possible to port mirror the ports that make up a LAG?  When I try to do that, it displays a port mirroring status of "Not Ready" for the ports.Also, is it normal for the switch to stop accepting traffic on the destination po...

Went to log into the web admin interface on my SG-300 today and I get this in both IE and Firefox:I'm not able to login by typing user/password and just pressing enter. I've tried power-cycling the switch, and this didn't help, however, since the pow...

Hi,I saw the annoucement stating that "200 and 300 Switches now supports Cisco Pre-standard POE" available here:https://supportforums.cisco.com/docs/DOC-18337However, I cannot find the 1.1.1.8 firmware for the SG200-08P in the download center (latest...

hello guys I am trying to set up this thing, I managed to configure the intervlan routing and vlan tagging in the router itself (with its built in switch)the next step was 1) created the same vlans with the same ids in the switch (Since it doesnt hav...

HelloI was wondering if anyone could help?I have configured the above switch with 2 vlans, with vlan interfaces and a default route that points to an internet router.The switch is running in Layer 3 mode================                              =...

Hello,I have problem with GE2 port VLAN membership in trunk mode.When I set GE2 port as a trunk for VLAN 11 tagged, VLAN 48 taggedand VLAN 666 untagged+PVID, it stays so only untill reboot.After reboot there are 11, 48 and 666 tagged, while VLAN 1 un...

Since the ESW's are end of life what switch is recommended for use with a UC320w?  I know it at least needs to be a 200 series, but what is the difference between the SG and SF?  I do not need a POE switch or Gigabyte.  Thanks,Jeremy

I am looking to create two default routes on an SGE.I will be setting up a network in which two organizations will be sharing a common infrastructure and phone system but need to maintain separate data and servers.I will create three VLANs: Company A...

Hi all,I'm troubleshooting a LAN issue I have, and I wanted to hook up wireshark to record traffic over the course of a couple of hours for later diagnostics. I went into the web administration interface, clicked Administration > Diagnostics > Port a...

Hi,So it seems like the SG300 series (have here sg300-52) can be run as standalone unit and also in stacking mode.but i can not find any documentation or howto for this. can someone pleaes help me with this issue?greetings,max

Hello,I'm designing a network system for Nextrio Company. Right now, I'm going to choose a copy machine which has fax function; a small switch which could connect this copy machine and several other computers; several ip phone for small business. Cou...

I'm using two sg 300 switch (Fw 1.1.1.8) and I configured vlans for data and phone. Enabling voice lan, dynamic voice vlan, the option Enable Thelephon OUI is grayed.I think that this is related to LLDP and CDP setting's, but I'm not able to discover...

This is the third series 300 switch I've configured, but have not run across this issue before.  Hoping someone out there can help.  I've attached to the switch via the console port and even tried with the web interface but get the same results.  Upo...