Storage Networking

Hi,I installed Fabric manager server and trying to discover a fabric.after entering the user and password for the SNMP v3 I am getting SNMP timeout.the user is configured on the switch and "snmp-server host" was created for the fabric manager serveri...

We have a UCS C220 M4 rack mount server running ESXi 6.0 U3. I currently am only able to run 2 VM's on this host as I only have access to the 2x 1Gbps onboard NIC and access to local storage as I don't have a fibre card for this server to zone in my ...

Dear Forum,  I have 1 UCS Server C240 with VIC card installation, i would like to connect VIC using iSCSI or FC connect to Storage buy Direct connect from server to Storage, but the vNIC in VIC card shown that it is not up, is there anyway that can c...

Hi All, I have recently completed the installation of ISL links, after the initial configuration they were all ok, until I checked them again this morning and to my surprise I saw the errDisabled error on two links.  Please help me with the resoluti...

Hi Fellows, I have required Cisco MDS fabric switch for DC with below requirements... anyone can suggest better model including below features :- support for enterprise class storage solutions e.g. EMC, HP, Hitachi etc.  4/8/16Gig fiber channe...

Hi All, Hoping someone can help me, I want to configure our C7000 with 2 x hp vc flexfabric 10gb/24-port modules to work with 2 x Cisco MDS 9148 switches but not sure what config I need to set on the 9148.  So far I haven't been able to get this com...

Does B200-M4 support boot from san or not ?

I am trying to understand the compatibility matrix for DCNM as mentioned  in the link below: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/10_2_x/comp_matrix/b_compatibility_matrix_10_2_1.html It says for MDS 9100 series following vers...

Hi, We monitoring our switches with an external monitoring application (SMARTS) and sometimes we have alerts for a CPU utilization like this: SMARTS: XXXXXXXXXRSAN - cseSysCPUUtilization - High CPU utilization. It's at 98 % (...or what ever...) Thi...

hello,can anyone help me konw that if the ucs mini 6324 QSFP can connect directly to none-cisco server or storage? thanks!

Bug: CSCuj18375 Cisco wants me to do a "write erase boot" which seems a bit silly.  Why not do this: copy startup-config bootflash:startup-config.txt config feature scp-server end Go to server, scp the file down remove the line with the garbage ...

My current 9124 switches are EOL in 2019 and I'm looking at what it will take to move my existing fabrics to new switches.My existing switches were provided through Hitachi Data Systems, which has not verified any version of NX-OS beyond 5.0(8).My pr...

Our install of DCNM (just for SAN management, and unlicensed since our SAN is comparatively small) currently resides on a vm, whose volume is supplied from a datastore ultimately supplied by the SAN itself. It occurred to me that if something went re...