Switching

Hi, We would like to verify that jumbo frames are enabled and MTU size is to 9216, for all Layer 2 switches in our data center.  QUESTION: Is there anyway to set the interface MTU to 9216 bytes?? We have run the following commands: 1.    # show  ru...

  I'm writting a script for my router to performe a series of functions.  Basically cutting and pasting from notepad with a series of commands to execute.  Does any one know how to make IOS pause for a set number of seconds before continuing.   For e...

i am having REP configuration seem to be not configured properly. below is the config summery.  I was running STP and removed to install REP. I am running IOS 15.0 on 3750 devices.  SW-1 configuration: Interface gi1/1/1 Switchport mode trunk Rep ...

Hey guys, I'm designing a new network for one of our customers and the customer requirements for fail over is a little more difficult than what I'm used to. In the picture shown, I'm feeding the site with two paths coming from different DC's which c...

I just started a new job and have been tasked with connecting a Nexus N9K-C93108TC-EX to a Cisco 4507-RE.  The people who initially did the setup did not think they could get the two to communicate, presumably because of the speed difference on the u...

Hi, we have 2* 5672 each of them connected to 2* 2348 cisco the two 5672 form a vPC domain the devices connected to the FEx are configured as static port channel, the connected port on the fex devices configured as vPC While upgrading from 7.2 1 N1 t...

Hi, i have a cisco 2951 with a Ethernet Switch plugged into it, everything is working great but for some strange reason when i connect to the ES module i can't see any stats on the L3 vlan interface. The associated switchport does show stats but the ...

I have Internet connections coming into a public network switch, with NOTHING but public IPs vlan'ed out to different tenants. Essentially this install is providing Internet access to different firewalled LANs, or tenants. I'm in a situation were I'm...

Hello everybody Currently I'm rebuilding our distribution & Access Layer.  We got 2x SG350XG 24F for the distribution layer and 3x Cisco 2960X for access. The SG350XG are configured as a Stack. Portchannels are configured with one port of Unit 1 an...

Dears Please describe me  Q-1 what is native vlan Q-2 what are the benefit of native vlan Q-3 What is different between Vlan 1 and native vlan Q-4 How native vlan works

Hi there, Im having issues setting up ssh on my cisco 2960.  Can anyone help. Many Thanks Abdo

hi, i need ip services ios imag for cisco 3750E switch . link :https://software.cisco.com/download/release.html?mdfid=278169821&flowid=&softwareid=280805680&release=12.2.55-SE11&relind=AVAILABLE&rellifecycle=ED&reltype=latest When i download it i ge...

I need to connect a few HP Proliant servers and an EqualLogic SAN to SG350XG-24F switches.  I would like to use some twinax cables from Axiom.  However the cables from Axiom mention compatibility with a specific vendor for each cable SKU. I thought t...