Switching

I need to advertise routes learned from one E-BGP neighbor to another E-BGP neighbor. This must be e-bgp, and the prefixe's learned will be changing as needed. The prefixes I receive from neighbor 1.1.1.1  need to be advertised to neighbor 2.2.2.2. T...

In ASA firewall, normally use access-list or access group to controll permit or deny policy.   But I want to use interface(select inside, outside,dmz..etc) for access control.   How can I use access control on interface ?   Is it work ? and Is it us...

may i know the purpose of using ip sla, in one of our routers, we define on ip sla, icmp-echo destination ip and source-ip, then we schedule ip sla. if the destination ip is not reachable, what will be result?

Hi Guys, My ISP (Telstra) has asked me to shape my WAN traffic to match the current plan (100/100Mbps). Their reasoning is that stability will improve. I have played with egress on Catalyst switches but I would like to perform this shaping on an Cisc...

How to disable all the commands that run on privilege exec mode [ router# ] and only enable basic t-shoot commands like extended Ping & traceroute from a user PC that has a remote telnet connection of a router?

Hi, Would like to ask the root cause on why our Nexus 7000 becomes default configuration after we reload the device. The reason we reload the Nexus 7K is that we encountered issue when saving the config. Thanks

I have some 2960X switches (lanbase) running with a 15.0.2-EX IOS version and like to upgrade to a 15.2E version. In the cisco download tool, the 15.2.2E6 is currently the suggested version. But there are also MD releases with a higher version, like ...

I got new router cisco 1921, I've license security in Router's Flash but when i install license i recieve error message : Licence in Router's Flash: " Directory of usbflash0:/ 1 -rw- 75608148 Feb 4 2017 17:45:34 +00:00 c1900-universalk9-mz.SPA.154-3...

Hi All, I have an issue with one of my switch ( 4500 series) . Actual Scenario:  -------------------- We have a server which has two interfaces and each assigned with an IP address ( in the range[10.49.8.132/27]) . Eth0 IP:10.49.8.135 and Eth1 IP:10...

Hi, I have configured a link between an ASR-920-24SZ-IM and a Cisco7609 : ##### Cisco 7609 #####interface GigabitEthernet2/9 mtu 9216 ip address 192.168.2.2 255.255.255.0 speed nonegotiate no cdp enable ##### ASR920 #####interface GigabitEthernet0/0/...

Hi gurus Sorry if I have posted this before but I cannot find it.  I have successfully implemented DHCP snooping throughout a network with hundreds of switches and am having a funny issue when the interface on the router is in a VRF.  In all my netwo...