Switching

We've got a WRVS4400n which we use for our internal Wifi. It has a static IP of 192.168.0.45 and I've previously connected in to the admin console with no problem. However I need to make a few changes and am finding that I cannot access the admin con...

Hello Guys Anyone familiar with the error log BFDFSM-6-BFD_SESS_DOWN: BFD-SYSLOG: BFD session ld:1 handle:1,is going Down Reason: DETECT TIMER EXPIRED? Upon research I saw https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux51223/?referring_site=bug...

Hi, We have created a DMZ zone for server  with VRF DMZ with subnet 192.168.100.0/24 with SVI 400 as below int vlan400 ip vrf forwarding DMZ ip add 192.168.100.1 255.255.255.0 For user traffic we have deafult data VLAN 2 with subnet 10.180.2.0/24 as...

We are wondering if not having route entries in some of our switches (all Cisco WS-C3560-48PS switches) or not having a default gateway set could result in this issue.  All these switches are setup for VOIP phones to connect to them for power (Poe) a...

Dear all, I have problem 2 uplink connect to  Cisco 3850 2 unit ( connecting stack cable). the switch Active is ok when i connect only 1 cable ( Active switch to Access-switch ) but when i connect both connection to Access switch the client cannot p...

If force the failover with hsrp, would it be an interruption on that subnet?.

I am experiancing an issue on one of my 3850 switch. Seems power supply is working fine but i am getting alert for power supply intermittently. Details below, SW PID Serial# Status Sys Pwr PoE Pwr Watts-- ------------------ ---------- --------------...

I have 2 Nexus 9K to be bundled together using vPC. First Nexus:vrf context management  ip route 0.0.0.0/0 172.25.100.1vpc domain 1  peer-keepalive destination 172.25.100.2 interface port-channel1 ----<<< 2x10G connected to other nexus  switchport ...

Dear experts, One of the C2960X switches, which is member 5, keeps removing itself from the stack (FlexStack - there are 5 members in it). I tried to research on the issue on the Internet but couldn't find anything useful. Decided to write it here. I...

Is it possible to install a 3850 Switch vertical. Is there any Mount-Kit to install at wall, because lack of space?

Good afternoon all A little help with probably a simple query but here goes. Currently we have a Ip range of 192.168.50.* subnet of 255.255.255.0 which is dishing out DCHP requests from our Server. Ove the years, servers printers and pc's have increa...

I have a Nexus 5596UP and in the log I see this repeated:  %LACP-5-LOG_FSM_UTILS_FU_GENERIC_ERROR: FSM_ASSERT Anyone now what this means?