Switching

Hi AllI have a VSS pair and have and I have had an issue with a reload (crash) has anyone seen a bug match for the following:%PARSER-5-CFGLOG_LOGGEDCMD: User:MJ  logged command:interface GigabitEthernet1/6/42%PARSER-5-CFGLOG_LOGGEDCMD: User:MJ  logge...

ok everyone - got a strange one for you:I have a 6509 with multiple vlans configured. This config has been working fine for months. I have a server (Linux which has 1 nic, 4 addresses configed) which has ip addresses 173.x.x.100, 173.x.x.101, 173.x.x...

Hi,We are getting the following alert from WS-C6506-E VSS switch to LMS, below is the message we get Date: Fri, 23 Sep 2011 15:30:52 +0530Subject: 00000RT ; swz-core ; Fri 23-Sep-2011 15:30:23 GMT+05:30 ; Critical ; Environment ; Active ;ALERT ID   ...

I can't find any documentation on this. When we inserted a transceiver in a 4900M (stp root bridge), it disrupted spanning-tree. We are running MST, and it caused a topology change in every instance, that again caused a couple of seconds of outage.Ha...

plc-sw-core#enplc-sw-core#shplc-sw-core#show ip roplc-sw-core#show ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area        N1 - OSPF NSSA external type 1, N2 ...

i all i have 2 2900 series routers both are connected via DVBs Router/device R1>Dbvs<R2R1 to DVbs Connectiion R1: 192.168.45.10 netmask 255.255.255.0 DbVs 192.168.45.101 255.255.255.0R2 to DVbs connection R2: 192.168.12.10 netmask 255.255.255.0 DBVS:...

hi all, i have this routing problem. here is the topologySpeed:Site A to Site B - 100 MbSite B to Site C - 2 MBSite C to Site D - 10 mbSite D to Site A - 100 MBwe run ospfwhen i ping 192.168.1.1 (site A) from site D and tracert it takes me all the wa...

Hello, I have a multicast requirment, that I dont understand how to implement.I have two sites, with 2 sparse mode multicast requirments. The network is already configured with an RP at both ends at both ends as this need to work in both directions. ...

Dear all.We have a problem with a stack // two switches.WS-C3750X-24S-E  &  WS-C3750X-24T-LBoth switches have the same IOS.WS-C3750X-24S-E**********************Switch Ports Model              SW Version            SW Image------ ----- -----          ...

Hello all,Dive in:  Have two VLANs defined on a switch, VLAN100 and VLAN101.I have a machine in interface Fa1/36 assigned to VLAN100. I have another like machine in Fa1/37 assigned to VLAN100.Port 36 is not getting a DHCP address.Port 37 is.Tried put...

Hi, guru's i have a query on network connectivity for an application server & its database part. both these servers are to be connected to a single 6500 switch. application server is what users will be allowed to access. database server will only be ...

I am working out a lab where I have 2 4506e core switches and 3 3750 access switches. Each access switch is connected by a fiber connection to one of the core switches. For example G1/0/49 goes to Core A on Gig2/1 and G1/0/50 goes to Core B on Gig2/1...