Switching

Hello,Finally, i have seen that Cisco has released an X version of the popular 12-port SFP C3750 switch.I have also noted that they have a 24-port SFP model released that is stackable.I want to deploy a double-stack of this model (so with 48-port SFP...

The topic says it all- It looks like 2960S is cheaper than 2960G at same port configuration and image. Plus with the -S model you get 4 dedicated SFPs.So wouldn't 2960S be better choice than 2960G even as a stand-alone (non stacked) access switch? Or...

hi, I need to implement this functionnality to be hsrp aware .But the command is missing with my ios: Could yuo confirm thus?Thanx in advance.Fab. D

Have a 3560 cisco switch which is connected to pxe server that has a static ip and belongs to vlan 10 and a pxe client which receives ip from dhcp pool from switch is also connected and is in vlan 20. Pxe server and pxe client are directly connected ...

Hi there...I'd like to take a step forward and introduce my problem, looking for a professional supportfirst of I'm an IT engineer working in a small operator telecommunication company, a few days ago we implemented a new technique of load balancingb...

I was trying to mark DSCP on default-class to 0 (default) on inbound policy type qos,policy-map type qos non-VoIP  class type qos class-default     set dscp defaultBut, it gave me a error, sayingERROR: class-default cannot be modifiedI am running Nex...

Hi all.  I have one Cisco MWR 2941 router in in the basement of a campus building that will connect to Windstream's 14 incoming T1's.Fiber from Giga 0/0 and 0/1 on this router will connect to the campus fiber.From the target building on the other sid...

Hi Experts,Can any one please suggest any method for  proactive preventive maintenance of Network devices ?I have some1. Backup configurations2. Checking logs daily3. monitor CPU and memory utilization4. Checking interface errors---------------------...

Hello.Please I need help for disable the services ssh, ssl and ftp en my css 11503.Thanks

Pretty self explanitory:Does the SD208P support Cisco inline power?

Hi,Currently I'm running VSS on 2 6509-E chassis. Both chassis have identical hardware:VS-S720-10G-3C (1 per chassis)WS-X6708-10G-3C (1 per chassis)other line moduless72033-adventerprisek9_wan-vz.122-33.SXI6.binThe VSL links use 1 TenGig iface on the...

I've posted a couple of times but really haven't heard back.I have an SG300-20 in layer 3 mode.  I have a generic, non vlan-aware gateway.I'm trying to setup a few vlans.  if possible, i don't want to use VLAN1 because that's adminstrative.I've creat...

Hi everybody,is it possible to configure non-contiguous VLAN name on NX-OS?The commandname "XXXX YYYY"is supported in IOS not on NX-OS.Is there any othe way to configure non-contiguous VLAN names?I tried also name 'XXXX YYYY' syntaxRegardsStefano