Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
hello all,How to configure the automatic failover between two connection (access) internet in cisco routeur 2800 serie?Best Regards,
Resolved! 4948 not logging port events
I upgraded one of my old 3500 switches to a 4948. The log on the 4948 doesn't show port events like up/down events. All I see in the log is configuration changed events.Is there a way to turn this on?I have this in the config.logging buffered 65536 d...
HelloI have recently setup a medium size network with around 70 switches and I am now getting to the point where I need to configure the time on those switches. I understand that I need to identify a device to use as NTP server. We don't currently ha...
Dear All,We had a problem in one of our ACE module which we are using with a 7600 chasis. ACE module rebooted automatically and came back so opened a TAC case with cisco and told us that it happened due to a bug in OS of ACE which could not be fixed ...
Hi,I am familiar with use and concept of VTP however I have never used it in a large network deployment, certinaly not in a modular switch block architecture. However, as a result of recent issues due to trunk link mis-configurations and spanning-tre...
Is there a general rule of thumb on how a switch ethernet blade should be populated in relation to getting the best performance per asic/port combination?For example:If I have a four 10/100 ethernet blades on a 6509 and there are 12 ports per asic on...
I have a couple of VLANs on my Cisco 4507.These are the Vlans10.10.1.X/24 -- management10.10.2.X/24 -- User vlan10.10.3.X/24 -- Server vlanI don’t want 10.10.2.x and 10.10.3.x to access Management network.But management network (10.10.1.x) should be ...
Resolved! vtp
I've got 2 3750 switches in a secure vtp domain - one is vtp server, the other vtp client. I'd like to manage both switches separately with no vlan propagation between them, i.e. not use vtp at all.Is there a way to reconfigure the switches such tha...
I upgraded the ios for cisco 2950 switch with c2950-i6k2l2q4-mz.121-22.EA13.tar.After upgradation,i was able view the cisco web browser,by using the link http://10.x.x.x/.But after sometime ,i tried & its not working now.I m getting the below message...
Hi I am Jibu Ninan Kurian i need help from the experts. for 6506-E IOS upgrading from ipbase imge to S72033-advipservicesk9_wan-mz-122-18.SXF17.binsup-720-10g-3 best regards Jibu Ninan Kurian
Hi All,Does Cisco 6509 support NBAR ? do i need a FlexWAN module to implement the NBAR ?Module:WS-SUP32-10GE-3B ,WS-F6K-MSFC2A,IOS:s3223-ipservices_wan-mz-1.122-18.SXF13.binThanksGD
Examine the figure. You want to configure an access list that would permit everyone on the 172.16.0.0/16 network to access resources on the 172.18.0.0/16 network but deny everyone else. You configure the following access-list:access-list 1 permit 1...
Hello,I am trying to find if there are any issues in upgrading hybrid 6500 in one reload. We plan to put the IOS on MSFC and CATOS on SUP, change the boot statements and reload the device. Is this expected to work good?Thank you!!
When configuring a SPAN session for a single direction on core 6509:monitor session 1 source vlan 1, 5 , 7, 9 rxMonitor session 1 destination interface g1/1VLAN 5 is uplink to Firrewall/InternetVLAN 7 is workstation VLANIf a workstation is attempting...
Hello everyone,I have a question about EIGRP offset-list behavior on Catalyst 3750 12.2(44)SE.My customer informed me the following three cases and results.Case 1[Configuration]offset-list 0 out 100 Vlan10[Result]Metric of all EIGRP routes outgoing t...
