Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hi, new here so please be gentle :)Does anyone know what is the difference between the 877W-G-E-K9(Europe and international version) and 877W-G-A-K9 (America and Asia,Pacific version) please?I'm in New Zealand (Asia Pacific region?) and trying to get...

sh interfaces switchportOn my access ports I see the following:Access Mode VLAN: 96 (switch name)Trunking Native Mode VLAN: 1 (default)Now the trunk port shows the following:Access Mode VLAN: 1 (default)Trunking Native Mode VLAN: 50 (NATIVE_VLAN)Do I...

Experts,I have issue with high cpu on the msfc2. This MSFC is on the 2nd core switch with all its hsrp status standby. THe process that is eating up the process is SCP async: MLS_EAny suggestion would be great

Dear experts!There was some pain my neck those days, that I found my 6506 sent a lot of ARP broadcast to address: 192.168.1.123(For security reason, I changed the address), but in fact, this address was not existence! It must be some one made this mi...

Resolved! No ping ASA C871

Hi, i have easy lab environment but i cant ping remote computer.PC1(172.18.1.200)--->ASA<-->C871<---(172.18.2.200)PC2.In attachements are configuration files for ASA and C871. I can ping from PC2 to PC1, from PC1 to C871 internal interface (vlan1-172...

Hi, everyoneFor priority queueing, we know there are 4 queueing (high, medium,normol,low). And I can configure all unmatched traffic is in default queue. What I want to know, Can I just configure two queues (high and normal), just one list is point t...

hetao by Level 1
  • 718 Views
  • 2 replies
  • 0 Helpful votes

Hi all,I have a switch c4510R and would like to use PBR(policy-base-routing), was searching on the cisco software advisor and did not find this functionality. So i can not use the PBR into c4510R?Regards.

r-barbosa by Level 1
  • 1521 Views
  • 14 replies
  • 0 Helpful votes

I want to filter mac address in specific vlan (vlan 100) , only specify mac able to go through gi 2/1 .i configure the cisco 6509 as below,but it does't work . All mac can out and from the interface .mac access-list extended ANY permit any anymac a...

Hello Can I pass to image METROACCESS by simply uploading METROACCESS image to a METROBASE ME3400G ???I posted this qeustion to Service Provider alos but no reply.REgards Everybody

enkli by Level 1
  • 610 Views
  • 2 replies
  • 0 Helpful votes