Switching

HiWhen I did a sh proc cpu on a cat2905 I got the following line and would like to know what it means and what it is used for? 19 1514584608 354200831 4276 9.83% 9.86% 9.82% 0 Calhoun LED ProcThankswvw

The 3550 has 2 Gbic ports and the 3560 has 2 sfp ports. How can i connect the 2 switches properly? I have 3 of the 3550 and i want to connect all 3 to the the 3560 since it has 24 1000 ports. Any advice?

Dears,Does Sw 2950 support command:switchport trunk encapsulation dot1q.i did not find this command.any help

Hi,my first post here. I have a small problem with transfering IOS image to 2621 router.When I try to tftp the IOS from rommon i get the following error:TFTP error 0 received (Undefined error code).TFTP: Operation terminated.When I try to send the IO...

Hi all,It may be a simple question to all, but I want know that we should create first sub interfaces on router for vlan's am I right? Those sub interfaces we can use for vlans in switch right? after that we should encapsulate and assign IP for sub i...

All,I have had an interesting situation posed to me, and I wanted to reach out to the community for some advice and/or to touch into everyone's knowledge and experience.My company has a customer, who is a hospital. The hospital is using DHCP through...

hi, i have a little confusion regarding peer groups so plz help me out. Suppose i have a router RA running bgp and it has 5 ebgp neighbours that are all grouped in a peer group, now i want to run the next-hop-self command on only one neighbour but wh...

A little background; my LAN has a Cisco 1700 switch with QoS and several 10/100 hubs connecting small clusters of desktop computers. Our T-1 with VOIP and 11 Cisco 7960g phones generates terrible quality phone calls on a regular basis but we do not ...

Hi,We have an office network (10.10.x.x) and a manufacturing network (192.168.x.x) and would like to limit access to the manufacturing network to only selected IP addresses that are on the office network.We have around $1200 to spend and would like t...

Hi,allToday,i upgraded IOS version for my 3750 switches.MY supplier gived me two tar files,one of which is for 3750-24ts and other is for 3750-12s. However,i found the two tar image files are all in same namning and size.To me,there seems no differen...

I need to have two redundant routers that should provide static NAT services. I run 12.2 (no flash memory to store 12.3) that can't bind static nat addresses to active hsrp (as recommended at http://www.cisco.com/univercd/cc/td/doc/product/software/i...