Switching

I'm looking to implement Private VLANs in a network consisting of multiple 48-port 2960 switches that are connected to a 4500 series switch via fiber. After reviewing the info in the PVLAN switch support matrix (http://www.cisco.com/en/US/products/h...

Hi!Kindly;Plz provide me a simple config between switch at ISP & others Switchs at the CustomerA(vlan 1 to 15)& Another CustomerB(vlan 1 to 15) using the 8O2.1Q Tuneling3560ISP Switch3550 CustomerA3550 CustomerB10xs for ur Help10XS

I have some problems with a WS-X4515 and a Broadcom NetXtreme Gigabit 5703. If I do a sh interface it will be appear collisions in that interface.

Hi All,I need to subnet my net 10.0.0.0/20 to a 32 subnets. It's easy.But also I need to do a strange trick. All traffic from subnets 10.0.0.0/25, 10.0.0.128/25 and so on, must be forwarded to MS ISA server if it's destined to network other than 10.0...

Hello,Basically what am I trying to do is establishing a PPPOE connection from our FW to Cisco 878, and get the public IP to the untrust interface of the FW. The interface of the FW of PPPoE(SSG520 - Netscreen) is quite simple..But on the 878 bridgin...

Does anyone have any information on how Cisco is going to handle the daylight saving time changes in 2007 for router and switch IOS's? Will it be some type of patch or will we need to update the IOS level on all of our switches and routers?

Hi all, When I redistribute static routes into a routing protocol, would It say via the router where you actually did the redistribution ?

Couple of questions:(1) I have searched and have found nothing on the processor speed of the 1841. Does anyone have this info?(2) For the 3725, what does 1 X MIPS mean for the processor.

First of all thanks to all, I'm adding a new access switch to my 6509 catalyst, I have to do this during business hours, how do I prevent this new switch from starting a root election and disturbing the rest of the network? thanks again

I am upgrading the image for the 4500 and last time that I did it, it didn't go well, actually it was a mess. So this time I want it to be smooth, hopefully. I went to cisco.com and got a hand-out on upgrading the switch for 4500 switch. But I am not...

Hi.My customer want to know the tag value of the my vlan's. A hexadecimal value. The place are connected by Metroethernet.ThanksPeterson

Migration strategy / testing. To reuse the legacy access switch stacks. The migration strategy will be to dual home each stack to both the legacy cores and to the new cores.Ashdogra@yahoo.co.uk