I noticed the Spark Board has a web server built into it and I wanted to poke around a bit but the standard UN: admin and Password: Blank doesn't work as the default. I was wondering if the unit is currently accessible via its web browser? or if it ...
Forum Posts
Hello, I have upgraded my SX10 codec to CE8.2.1 for the H323 protocol. It's been working fine until I restarted the codec -- all H323 configurations are gone. I have checked "Persistent" mode for the "Configurations". Have tried CE8.3.1 but the...
Resolved! DX SERIES ERROR/WARNING MESSAGES
CISCO is far about detailed install, deployment, user guides and api admin guides but where the heck are the warning/error message listings ???? And what they mean and what is a fix action ??? Example: DX70 Diagnostics .... Warning: Other diag...
We need to use a longer than standard camera cable for SX20. We want to use a Cisco Split cable ( separate female HDMI and RJ 45 ) and 10m HDMI and FTP cables. Unfortunatelly I have found no information about FTP cable pinout. It is a straight or cro...
Hey guys,i have sx20 i want to upgrade the software of device but problem is network port is not working, is there any other way to upgrade the software.Thanks,
Resolved! No Camera detected Tandberg C20
Hi Good Morning I have 2 C20 with the same configuration, but in one C20 I couldn´t it control by web, I mean, I couldn´t move or zoom it, but in the other one I can. Could you tell me how I need to configure it ? This the picture about th...
Hi Is there a status feedback after a scheduled meeting for the Join Meeting button? Many Thanks
Hi, I am using Cisco TelePresence System C40 with firmware TC7.3.5.a93bdb1. I've discovered a bug in the camera presets - when I am choosing any of it, input is being changed (in my case 1 to 2, which is currently not in use). Any ideas how thi...
cisco C60 device type: Profile 52” Dual Resolution: Dual 52” Full HD LCD, 16:9, 1080 x 1920 resolution. custom Wallpaper resolution: 1080 x 1920Layout settings have been set to stretch to fit. Yet the wallpaper looks stretched out, any suggestions ...
Hello our encoder shows in the message status: VII error and EDH input loss. What can be the problem?
We are planning migration of our endpoints from VCS to CUCM for call control, as part of that project we were mulling what if any feature differences/capabilities between keeping our endpoints provisioned/managed by TMS vs CUCM? Is there anything C...
Hi all, i'm using Conductor with uploaded option keys: LIC-CNDTR-B30 LIC-CNDTR-C50 could anyone explain which are capabilities i can employ with these licenses in place? regards
I want to build the following system:1x database1x database + Call Bridge1x database + Call Bridge 5 simultaneous conferences I need to order,R-СМS-К9 - 3 pieces or just one?5 pieces. SMP + licenses. Will they be shared by the cluster? thanks for the...
Resolved! Trouble upgrading SX20 firmware
I am trying to upgrade the firmware on some SX20 to ce9.2.1. The firmware package uploads okay and the codec and touch 10 seem to upgrade fine. When it comes to the PrecisionHD 12x the whole thing fails and reloads the ce8.2.2 firmware. I also tried ...
Any help from expert ! I have a 3 VM server setup for xmpp , and trying to setup the xmpp clustering, I did followed the clustering commands from the scalable and resilience deploying document ,, every time I did ( 5 times ) the call bridg...
