TelePresence and Video Infrastructure

Hi all   Any one show me what is List References in Cisco TMS and when do we use this one?   Thanks Thuc  

Hi   I have a dx70 that currently has developer version installed. This is not allowing me to upgrade. I follow the steps below and nothing works: 1. follow steps on the conversion guide from android to ce 2. factory reset 3. pointed dx to cisco upgr...

Hello everybody,    I need to change the ip address of the DNS in our expressway. Which considerations i need to have in mind in order of do this change?. Do i need to do something apart of change the ip address on the expressway E and C through Gui?...

Hello Friends, I have installed SX10 with the latest software version i.e: CE9.2 and the same SX10 is registered with the Call Manager. I am able to make a calls with internal IP phone extension users and even the out dial of PSTN calls. I can make a...

Hi guys,   Is there a way to change and save a default setting of the speaker volume for IX5000?   The speaker volume can be controlled with Touch10, but this is just a temporary setting valid for a current conference. So next time when another confe...

Hi all,    We have an old MXP 3000 codec with a TTC8-01 HD cam which worked fine. During a recent move, the camera was dropped and broke so we found a second hand one in another building. The problem is when connected (using the proprietry cables) th...

Hi guys, I am wondering if it is possible to set up dot1x on a TelePresence Touch 10. We linked it by IP with our SX20 using software version TC7.3.4.e4daf54. Hardware version is 102310-1. The SX20 itself works fine with 1X. I didn't find any documen...

I have a SX80 codec connecting with 2 displays. I have set the selfview on "first role" that the selfview image is able to show on the first display screen. However, when I reboot the codec the selfview setting will change from "first role" to "third...

I am running tms 15.5, when users first login they are added to the correct group but the firstname, lastname, and email address information needs to be populated manually. I also have ldap configured and can see run ldap sync when I link on users. I...

Hi All, I keep bumping into some problems regarding ports within the Telepresence portfolio. If i read the documentation portlist are always given, but not in a usable form. In order to convince the network administrators we need to list the ports di...

Hi all, I need to be able to specify for a new building what the lighting needs are in a video conference room. To do this I need to know: (a)  what minimum light level is needed for a Cisco PrecisionHD camera to produce a good quality image without ...