TelePresence and Video Infrastructure

We are trying to collect RTP statistics such as jitter, packet loss and latency from our endpoints. Http feedback works partially. We would like the codecs start posting us RTP stats for the ongoing calls as well. Is that possible? Following is our c...

hi, we have installed sx10 video conferencing device in mumbai office and another at delhi office.  we have also installed simultaneosly a project with a projector screen in mumbai office and running poweroint presentations. my question is as follows...

We are preparing to evaluate a Shoretel VOIP system. I was wondering about QOS, what is the easiest /best setup is for a none Cisco phone: Auto QOS or policy/profile? I will be using LLDP. The design will use 2960s-48 POE flexstack switches and 4506-...

In setting up SX20, is there any consideration for assigning IP address?  The only requirement that I see is that it needs to be static IP address.  Is there any other things that I should be aware of or to consider?  I was just thinking of assigning...

Have an issue with some of my systems on TMS that I am receiving more No HTTP Response warnings.  I verified HTTPS is running properly on TMS and I have the SNMP and HTTP off, and HTTPS set on for the endpoints.  No firewall involved as systems are a...

I have systems running various firmware versions including: F9.3.4 (MXP Series) TC7.3.X (Series) CE8.2.1 (Series) X8.8.2  (VCS) X8.5.1 (VCS) 4.5(1.71) (Codian) 4.5(1.89) (Codian) J4.7 (MPS) 2.0.1 (Acano/CMS) We have been directed to upgrade SSL to cu...

Dear All, I am implementing CMS for the first time, i need some clarification on configuring: Customer Existing environment : 27x C40,Old Endpoints MCU 5310 with 5 HD Ports Old Registration VCS 20x Non-Tra Calls, 100x Tra Calls,H323 SIP Old Conferenc...

Does anyone know how to remove the 64bit block cyphers from the MXP VTC systems. We have to remove the from the /etc/ssh/sshd_config file ?? Also after doing that will I still be able to remote (SSH) into the system ?   Telnet is a no go.

Hello, is it possible to place video call between two sx10 without cucm/vcs systems? Thank you in advance

Hi.. We have a Profile 55’’ Single screen system.   We are not getting any audio output through speakers integrated in display unit.   We have checked the Codec output by connecting external speakers with codec and its working fine.   Now we are sus...

Hi team, would you please help me, i have a Cisco Mx 300 and the client need to connect second mornitor for the presentation but i did some configs and still not signal on the second monitor, can someone help how to do the comfigs please help..

Hi, Is there a way for me to disable support for Anonymous SSL ciphers on the SX80?

Hello, One of my mx700s during the call does not receive or send more audio even if it is not lost. In log peripherals.log I found this error repeated 2017-04-26T15:45:44.147+00:00 SalaPresidenteLitta E4:AA:5D:A2:53:C1 kernel: loop: Write error at by...

Good morning I want to know which are the differences between both DX80 endpoints: CP-DX80-K9 and CS-DX80-K9?

Is there any documentation explaining the differences between upgrading our Telepresence Software from TC7.3.8 to CE8.3.1? I'm currently aware of the changes with the Remote Controls and the Touch Pads but I'm trying to find more information regardin...