TelePresence and Video Infrastructure

Resolved! Change CUCM SSL Cert attributes

How do I change the values of the attributes that CUCM uses to create self-signed certs or CSR's? I'm referring to the settings that are configured when CUCM is installed, like organization, state, country, etc. Thanks, Mike

TMS Analytics Extension on TMS V15.3.0

Hi Guys, We have never installed our TMS Analytics extension since we got the key. We are currently upgrading our TMS from V14.6.2 to V 15.3.0. I have noticed in the Installtion Guide that TMS Analytics is only supported on V12.6 to V14.3 is this c...

SX20 and "resolution unknown" issue

Hello, I've been working with an issue where sometimes some systems at a customer site will display "resolution unknown" on the touch panel when connecting a computer to share content from. The signal has to make its way through several Extron A/V ...

How to build an interface panel for the MX700 system

I have created the interface panel using the In-Room Control Editor, but I don't know/understand where to put the the <Event> code to perform an action when a widget is pressed. There seem to be no complete XML samples in the documentation on how to ...

SX 20 Monitor 2 output problem

Dears gents , I have sx20 and i connected the first monitor to display and i second output to recorder , the first out is giving signal and it's OK but the second monitor not giving any signal to the recorder it's given only CISCO logo once i restart...

How do I get SX20 unit to only tunrn on with pressing Remote button and not thru motion

I have several SX20's a c10 and 2 C60 units. All my staff would like the units to turn on only when one presses a button on the remotes and no other way. 1. Is this possible? 2. How can I achieve this?

Resolved! Lock the volume control on the SX device

Hi all, Do someone knows the way to lock the volume control on SX devices? We want to set the volume to max value and disable ability to control it from users. Thank you!

Resolved! SX20 Camera Not Working

Good Day, My SX20 system camera is not working. System powers up fine but the camera doesn't, it just shows white LED indicator right from the start and it never changes state. No video shows when you check in self view. When in video call with othe...

DX80 Far End Camera Control - Does it have it?

I just set up a DX80 on prem and am connecting to a MX300 G2, also on prem. When I connect to the MX300 with my iPhone Jabber client I have far end camera control functionality but I don't see it on the DX80. From this guide it looks like far end con...

SX80 Not connecting to network

I'm stuck at the network settings setup for the SX80 because it's not detecting a DHCP server or validating the static IP assignment. I've verified with the network tech that the IP and VLAN information is correct but nothing works. Should the LAN po...

Cisco TelePresence Content Server Error "Content was blocked because it was not signed by a valid security certificate"

Hi All, Can you help us to identify what is the caused of this error encountered when we tried to open the video recorded session on Internet explorer. Error Encountered "Content was blocked because it was not signed by a valid security certificat...

Use Tandberg (Cisco) Precision HD TTC8-01 camera upside down (ceiling mount)?

Hello, is it possible to use a Tandberg (Cisco) Precision HD TTC8-01 camera upside down (like the bigger models), mounted on the ceiling? Does the image get flipped automatically like with the bigger models? Thank you very much in advance! Regards,...

Cisco TMS with Polycom Group Series

Hi , Does the TMS latest version support Polycom Group series ? Release note of TMS does not contain any data , if anybody have any experience please share. Thanks Manish

Resolved! Expressway E Failed - Either there are network connectivity problems, or this peer has different encryption support (AES / non-AES software)

I have two sites and one uc cluster as below: site -1 cucm pub-1 cuc pub 1 imppub exp-c-1 exp-e-1 site-2 cucm2 cuc2 imp2 exp-c-2 exp-e-2 ! i am making cluster of expressway E and C but it i showing error on cluster of expressway E: Failed - Either th...

Resolved! TMS 13.2.2 with Codian MSE 8510 Version 4.5(1.85)

I upgraded our Codian 8510 HD Blades to the latest version of 4.5(1.85) and I'm noticing that since the update, I seem to be unable to get any screenshot previews within the supervision section of my TMS 13.2.2. It still works properly for my SD bald...

TelePresence and Video Infrastructure

Forum Posts

Resolved! Change CUCM SSL Cert attributes

TMS Analytics Extension on TMS V15.3.0

SX20 and "resolution unknown" issue

How to build an interface panel for the MX700 system

SX 20 Monitor 2 output problem

How do I get SX20 unit to only tunrn on with pressing Remote button and not thru motion

Resolved! Lock the volume control on the SX device

Resolved! SX20 Camera Not Working

DX80 Far End Camera Control - Does it have it?

SX80 Not connecting to network

Cisco TelePresence Content Server Error "Content was blocked because it was not signed by a valid security certificate"

Use Tandberg (Cisco) Precision HD TTC8-01 camera upside down (ceiling mount)?

Cisco TMS with Polycom Group Series

Resolved! Expressway E Failed - Either there are network connectivity problems, or this peer has different encryption support (AES / non-AES software)

Resolved! TMS 13.2.2 with Codian MSE 8510 Version 4.5(1.85)

Room Booking (Cisco OS) cancel meeting

Cisco on Teams Room-VC support button

Cisco Telepresence IX5000 table speaker

Expressway v15.0.1 SSH port & firewall rule

Configuration for combining two different Room Kit EQs into one Room

seperately mute mics on sx80 and codec plus

p60 camera issue

Room Bar Pro - Output audio HDMI

Cisco Desk Mini Settings Not Saving On Reboot

Cisco EQ - Operating system