TelePresence and Video Infrastructure

Hi Everybody, I am trying to configure the Expressway-C and Expressway-E with dual network interface on Exp-E here is the connection background CUCM ---- (tcp)---- Exp-C ---- (tls) ---- Exp-E ---- Mobile Jabber voice External DNS: ext-domain.comInt...

All, Had a C40 on V5 of the software with username of "admin" and password of "cisco".  Upgraded to V6 and password went away.  Username Stayed the same. Upgraded to V7 now neither combination is working.  Did the default change to something else i...

We have a customer that is interested in testing CE8.0 firmware on their Cisco SX80 endpoint.  Release Notes for CE8.0 indicate that TMS 15.0 is required.  The customer is running TMS 14.6.2.   Does anyone have any information or experience on what w...

Hi I have the following scenario.  The user dials a number from a Cisco 79xx phone.  The dialed number needs to be checked against a white list.  The whitelist is on a database on a separate server.  Only calls on the whitelist should be dialed. Aft...

I am running TMS 15.1.0 and have an EX90 on TC7.3.3. Problem is when trying to connect it to TMS .. Getting the following Error when I try to add system in TMS . Details:  hostAddress: XXX.XXX.XXX.XXX, Description:  GetDocument Failed. URL: http://XX...

Hi folks, I am facing a very strange issue with TMS and Conductor concerning resource allocation on Telepresence Server. In summary, this is what I have:TMS 14.5.0Conductor XC 2.4.1Telepresence Server 4.0(2.8) - Full Licensed The issue is, I have a c...

Hello,My ExpressWy are actually used for Jabber.When my Publisher is down, the are no Jabber outside of network.If I check ExpressWay-C logs, I have this error (every 5 minutes) :edgeconfigprovisioning: Level="ERROR" Service="UDSManager" Detail="UDS ...

Hi experts, I have deploy case want to experts support: - My system: CUCM 11.0.1, IMP 11.0.1, Conductor 4., expressway C/E 8.6.1 - My system integrate with MCU RMX2000 polycom by SIP trunk from CUCM to RMX 2000 When i used a user Jabber (both interna...

I tried an upgrade on a TP server (on VMware) from 4.2 (4.23) to 4.3 (1.13) using the supplied Python Script "redeploy_vts.zip". The script aborts with the error message: "Current license or ESXi version prohibits execution of the requested operation...

Symptom: Calls between an MX300 G2 running CE8.1 and several different TX1310 immersive units would not setup. Conference Control Center showed 'Dialing' but no connection took place. Solution: Disabling multi-way on the MX300 G2 allowed calls to bui...

Hi all, Can someone please advise if there is a way to update the firmware on a DX70 device without using CUCM. I need to update the unit to version sipdx70.10-2-5-194. Any information would be greatly appreciated. Thanks!

hello i have an environment with 5 VC kits along with 4505 mcu, vcsc and tms , my VC kits are all unisite so are tied to the mcu for mutisite calls routing through the VCS-C and monitored from the tms. while on a call my VCS-C went dead and that affe...

.