TelePresence and Video Infrastructure

I have 2 EX90s (TC7.1.1) on a different company network that register via H.323 and SIP to a VCS (X8.1.1). Occasionally these two will Fail registering SIP and the only way to correct it is to restart the EX90. I've tried to turn SIP Mode off and the...

Hi All,I know that the management of the VCS has been removed from TMS 14.4 (which we have found very frustrating as highlighting in this thread, and is why we had to downgrade to 14.2 and then up to 14.3.2), but we are finding that TMS has not downl...

Hi All,We have recently implemented a Cisco Telepresence SX20 with NPP included.Our client would like to share documents from a laptop/PC on the same LAN as the Telepresence LAN.The NPP described that we can use VNC to perform the above but client wa...

I have several large conference rooms that have Cisco C40/60 installed. I was told that these units could also be used to call across our Cisco Call Manager to place standard phone calls. Is this possible? If so, anyone have some documentation?  Curr...

We are currently running CUCM 7.0.2 and Microsoft Lync 2010 and want to be able to have Lync clients make calls from Lync.  There are lots of documents that talk about the integration and this makes things very confusing (as to what to do).  What are...

HI,One of the options for installing TMSXE 3.1.2 is in non AD ModeInstalling with Non-AD modeTo be able to run Cisco TMSXE in Non-Active Directory mode, launch the Cisco TMSXE installer with the following command line switch :-NONADCONNECTIONMODEI ca...

Hi Friends, Am having 4 life size endpoints which are registered to VCS controller when i dial internally there is no issue everything is going well even presentation also good. When i dial a outside call i mean public  am not able to share the prese...

We have TMS 14.3.2, and need to change the SNMP settings on a couple of hundred endpoints. The template featiure has updated the endpoints, but TMS has the old snmp value?  Is there any way to do a bulk edit? To update TMS, requires arranging for the...

 I have a Enterprise Network Built over MPLS. Have Endpoints in Site 1.VCS-Control in SIte 2MCU in Site 3.There is no Routing Enabled between Site 1 and Site 3.MCU is neighbored to VCS-Control (Neighbor Zone). When endpoints dials MCU, the media flow...

 I have a Telepresence Content Server S5.3 and TMS version 14.3.We have created 5 Recording Aliases 88101 to 88105.When we schedule a call from TMS, we have the option to chose which recording alias is required. We could see that, we are able to book...

After creating a custom layout with the TC console and applying it to a C60 codec the following is observed: - After hiding all layouts and leaving only the custom created one as shown, the codec still shows the Equal layout and my custom layout- Alt...

Hi allI have an issue when booking WebEx enabled Telepresence with Outlook Productivity Tools - I can add the rooms using the "add TelePresence rooms" - Button and enable WebEx, but when I click on "send" the "communicating with server" message pop u...