TelePresence and Video Infrastructure

Resolved! Cisco TelePresence products vulnerable to CVE-2014-0160 -aka Heartbleed

https://tools.cisco.com/bugsearch/bug/CSCuo26378 So when I have EX90 with version TC6.3.0.3d8e7d1 everything is OK or should I upgrade it to TC6.3.1

TMS/TMS XE Microsoft 365

What is the latest stance on TMS/TMS XE supporting the Microsoft 365 environment?

what is the suitable product for video endpoints to participate in a video conference

we have a scenario where 5 "9951" Cisco video phones and 5 "SX20" units Plus other voice phones all in one site (Location) and we want to be able to create video conference between the video endpoints (3+ units video call ).and possibly with any oth...

SX20 into BE6000

Hi,Our customer has a BE6000 solution, they want to acquire two endpoints SX20 for a telepresence solution. Does they need any special requirement or license to add the SX20 into the BE6000 solution? Want would the customer need to integrate the SX20...

how to maximize video sessions in conference

we have VCS server with MCU 5301.There used to be 12 participants earlier in one conference but now only 10 participants can be in a conference I mean I can not call 11th participant. If I need to accommodate the new one, one of the participant need ...

When building a traversal zone between VCScc and VCSew does it matter if VCScc has sw. X4.x and VCSew has sw X8.1.1?

When building a traversal zone between VCScc and VCSew does it matter if VCScc has sw. X4.x and VCSew has sw X8.1.1? Regards, Natalia Vendel

Resolved! VCS-C 7.2.2 to VCS-E with X8.1.1

Dear all Is it possible for a temporar plan, to let it keep running the VCS-C with X7.2.2 and the VCS-E with X8.1.1 ?It is only for a short time, because I can not update the VCS-C so shortly im waiting for a Maintenance windows.any input appriciated...

Could you advice to me about SX20 log messages ?

Hi everyone Recently, SX20 has interoperated with 3rd SIP server & MCUregister & Connection was done , But it has a problem about video qualityThe symptom is that Video packet loss has continued generated from MCU to SX20 (Network status is fine , S...

TMS support for Polycom Group Series Codecs & RMX

I'm in a workplace that's blessed with a full mix of endpoints and infrastructure now facing bringing it all together.Can anyone shed some light on if / when Cisco TMS may support Polycom Group Series Codecs & RMX. Does anyone have any work arounds o...

Bridge call causing intermittent blurring?

All, I have recently been experiencing problems with our oversea’s telepresence endpoints when performing MCU calls, the customer is complaining of an intermittent blurring on all oversea endpoints are on a bridge calls, all P2P call are good quality...

Benefit of "mls qos trust cos" on 802.1q Trunk vs. "mls qos trust dscp".

For telephony, I've always trusted TRUNK uplinks with the "trust cos" command, and access-port uplinks with the auto qos dscp command. This has never been am issue because the switchport DSCP<-> COS mappings would map COS 5 to EF and COS 3 to AF24 or...

Cisco EX90 self view picture size looks compressed vertically

All of sudden Cisco EX90 Self View picture looks compressed vertically. What should I do to make the picture look normal?

HVC330 not able to call polycom hdx

hi, we are not able to dial our polycom HDX 7000 125.19.x.x##3456 from HVC330 aver video conference system. we are getting below logs Call-Status: Incoming Q.931 TCP connection establishedTermination Cause: Cannot find client kindly share experience...