I am new to Telepresence and came across a issue I can't find any help on. We have 1 endpoint connected to CCM and everything is working as far as video calls to my other endpoints. The issue is I go to dial another company that is using the same 4 d...
Just wandering if this is currently possible:Remote Video Endpoint (Via SIP) =>ISP=> VCSe => VCSc => CUCM => 9971 The idea would be to allow the 9971's (or any Video IP Phone for that matters) to received a video call from the internet via URI. I und...
I maked conferencing call from my sx20 to viewstation sp128. The problem is the far site can't received my vdo call, it hearing only voice. If i changed the sx20 to hdx7000 and made a calling to viewstation again, the confereincing work well. What is...
Hi all,An 880 MXP of our customer rejects multisite calls (I mean a second call) with response of "busy" when it receives multisite calls from other endpoints.However it can establish multisite calls when the 880 MXP dials to other endpoints.Ofcours...
I have a customer that wants to deploy the VCSE on the internal network with a VCS. The VCSE has the dual network option. Customer has carved out separate Vlans for the VCSE/VCSC. And will NAT LAN2 of the VCSE on firewall. All NICS will terminate on ...
Hi All,When setting the Server Address in TMS Connection Settings under Provisioning Tab for VCS Control as the FQDN, the status for all services is OK but I receive the following error:Certificate verification is enabled and certificate hostname che...
Hi Guys,Please assist.I have setup TMS PE Provision with Jabber but with the single username and password, it can be registered in multiple devices at the same time.Is there anyone to block it?Thanks.
Guys,We have a deployment on the integration of VCS to Microsoft Lync.Details as below:VCS-Control: v7.2.1VCS-Control (Lync-Gateway): v7.2.1VCS-Expressway: v7.2.1Microsoft Lync 2010All licenses needed for this integration is available except for the ...
Hi Team,We have 7.2 VCS Control server, I am not able to see the user account option under maintenance- Login accounts. Kindly advise.We dont have find me and TMS provisioing Extension service license, do you think this is the reason. I have just sta...
HI, I have already set a demo with VCSC and VCSE (both in the same domain); currently I can set a video call to outside (I test with other external domains) from any endpoint registered in VCS and VCSE also I can received. In addition to these I set ...
Hello Forum....We have a client who has a dual screen profile 55 with c60 codec, the presentation source seems to be the only issue, need your assistance with the following: Questions:1- What vga baluns best work with cisco c60 codec's2-What ...
Hi everybody,I hope somebody will be able to help me with problem I have with incoming calls to VCSE from my home unit.I have created some search rules to DNS zone but still same. By the way I have just endpoints in office registered to VCSE only.Any...
Hi,We recently upgraded to 14.1.1 from 13.2, we have a manual phonebook setup with 336 contacts, under 'Phone Books > Manage Phone Book Sources' the search function no longer works, tried with chrome and FF, it just returns 'No contacts found.'Is any...
My customer asks for an internal network of 4 sx20 sites, including outlook booking.First no external connection will be necessary and everything will be inside an internal network.My question: Will this work with 4x SX20 an TMS+XE without any regi...
