TelePresence and Video Infrastructure

I have a setup using VCS and Expressway, my endpoints are registered and serach rules and zones are in place. At the moment I can make outbound calls and answer inbound calls. I also have a C40 connected to a public IP and not registered to the exp...

Hi,We have a VCS Control cluster which is AD Integrated and accounts are managed by TMS through Provisioning Extension syncing with an AD group. Both peer with a single Expressway.From previous posts I have read that that the zone authentication poli...

Working to build a simple External Policy Server, and have it working to a degree, but have gotten stuck with the "ALIAS" details being sent from VCS.The VCS appears to send all the various ALIAS of an Endpoint in a string that looks like;ALIAS=david...

Dear I have these items CON-ECDN-SX2PHD12CON-ECDN-4501MCUCON-ECDN-SCNTRLK9CON-ECDN-LICVCS10CON-ECDN-SEPRESK9CON-ECDN-LICVCSE5CON-ECMU-CTITMSSW  My Questions are the following as below : - What is CON-ECDN-SX2PHD12 and CON-ECMU-CTITMSSW ????? - Where...

Hi, is it possible somehow to reboot a codec that is registered to TMS with SOHO/Behind Firewall Mode?I tried using configuration templates with the command: Reboot this system / Other type. But the C-series device will not reboot.The Problem is that...

Hi all:         Here is the scenario: I have a meeting room ,2 TV sets and a suit of audio.My c20 have the connection to the audio system,which means the voice of the telepresence can be out from the audio system,also my c20 have two Micro ,my tv set...

When trying to sign into Jabber I'm getting a error of "login failed".. registration failure reached out to another box on consumer ISP/network ..same issue... registered new account under new email..etc..same thing..

Hi,i have a CIPC 8.1.6 with CUVA 2.2 registered (SCCP) in a CUCM 8.6.2.This CUCM 8.6.2 have a SIP trunk with a VCS X7.0.3A C40 TC5.1.3 registered on this VCS as SIP.The search rules are fine.The C40 can call the CIPC+CUVA, with media routed=false on ...

Incorrect connection status being displayed - A resource shows as connected on  TMS but in reality is not and  vice versa. Moreover there are considerable  delays in getting a site connected. Sometimes it does not connect. This is is  same for both m...

Hi all,Cisco TelePresence Management Suite 13.2.1 is now released. The software is available on cisco.com here, and please remember to read the release notes before upgrading.Cisco TMS 13.2.1 is a maintenance release, and the main new feature is supp...

Hello,Is it supported to bring a CTS1300 into a multisite call? I am able to bring it in successfully but it downspeeds the call to 576p which doesnt work well with the CTS. Any suggestions?Thanks in advance!