TelePresence and Video Infrastructure

Does cisco has a solution for this caveat?  It works for OCS relay but not for B2BUA.Call forward from Lync to a VCS FindMe or endpoint results in a ‘loop detected’ callIf a call from Cisco VCS is made to a Lync client which has a forward to another ...

Hi,I am getting a critical error for TANDBERG VCSC saying that memmory utlization is 93% , Error condition is Critical form the OPM console  .   Does anyone know how to fix this problem? Let me know if you need any logs. VCS version is X7.2.1. Ple...

We have several CTS series systems and now got the first C40 device.I can get C40 registered to CUCM but not able connect any CTS system.CTS systems works fine on point to point and multipoint calls.CUCM is version 9.1.1CTS systems are 1.9.4C40 is TC...

Is CEC enabled by default or not?How do we enable CEC on SX20? My SX20 codec is not powering up the display screen on going from standby.SX20: TC5.1.7

When someone purchase a VCSC and or VCSE, do you automatically get a number (10) Jabber License? If yes, how do you get the license or key? I have both pieces of hardware and was told that I should have gotten 10 license by default, but I am not sure...

Hello, we are using TMS version 13.1I try to set up a conference to call from one of our endpoints (older MXP 3000 unit) to an IP address with a couple of parameters specified in it.  Specficially, this is to set up the call to the BlueJeans endpoint...

Hello. Thanks for reading my first post...So I inherited an enterprise deployment of TMS (v12.6.2) with 16 VCS Controls (v7.0.3) and 4 VCS Expressways (v7.0.3). The Provisioning VCS Control is v7.2.1. Seems like the call routing design uses a single ...

After successfully joining a virtual room the operator voice keeps screaming, "Please enter a room number ..." over-and-over again. Endpoint: SX20 (v6.0)MCU 4501Any suggestions?DW

hi,We are a mobile TV company where in we have a contract from other companies to receive channels over internet and we inturn publish it to public.The issue is,there are currently 8 channels that reaches from internet that uses a bandwidth of 2 to 2...