I am planning an upgrade of my environment - I have 2 domains each consisting of 3 5108 chassis, 6248 FI's, B200 M3 and M4 blades, and one UCS Managed C220-M4S. Currently at 3.2(2f) all running ESXi 6.0 U3. vSphere has been upgraded to 6.7 and I want...
Forum Posts
Resolved! CISCO UCS C240 M4 INSTALLATION ISSUE
Hello, I am in project installing New Cisco UCS C240 M4 server. Here in its Raid storage configuration is as such 1)UCSC-MRAID12G- Cisco 12G SAS Modular Raid Controller 2)UCS-HD18TB10KS4K - 1.8 TB 12G SAS 10K RPM SFF HDD (4K) The Server is loade...
Hello, I have some questions about modification on a HyperFlex infrastructure. I have a 3 nodes cluster with VMWare and there is some modifications that i will have to do :change the gateway of the entire infrastructureallow some VMs to contact OOB m...
Hello Team, I have one interesting query related to FI failure detection delay. Lets say one of my FI got failed ? Detection time and tries? Is the failure detected with zero delay or only after a delay of x seconds ?If there is a delay of x seconds,...
Hi, I would like to know CISCO UCS MP is available free for usage or i can use if i have valid license for Cisco UCS or need to purchase separately . I wanted to monitor UCS servers in enterprise environment. Please clarify. Thanks in advance.
The UCS drives I have are firmware A005 since we keep them updated with HUU as recommended. The UCS-C22-M3 requires a 9240-8i for ESXi to be able to be installed. We are trying to find an actual use for it. The 9240-8i requires firmware A001 to be on...
Good,I urgently request help, it is a task of my university, I must install the UCS emualator, I have version 4.0, and what the teacher asks is that there are 3 chassis and each one I have blades, and that you can ping a server to another from ssh, p...
Hello,I am trying to allow users that get AAA from ISE to our newer UCS manager. I have added the ISE to the provider group but for some reson is not authenticating network users that currently have access to other network gear.
Hi,Can anyone please advise if the E5-2637D (v3) CPU is supported for use in a C240 M4S (assuming 2133MHz memory)?The datasheet for the C240 M4S doesn't list it, but does list the E5-2637E (v4), which requires 2400MHz memory to get the full bus speed...
Resolved! iSCSI Offload
Does the vNIC in Cisco B-series blades support iSCSI offload ? Similar to how Chelsea or Qlogic (QLE8442) can do the tunnel Encap/decap at the NIC level
Hello,We want to the maximize FC bandwith on B200M5 with VIC 1340.Chassis is linked to FI with 2x40GB links per IOMFC uplinks are 4x16 GB per FI to brocade SAN (32GB, sfp 16 GB)SAN Array is Pure FA m50r2 with 8x16GB uplinks.OS is ESXi 6.7U2, UCS FW ...
We have 5 UCS chassis all with UCS B220 M3 or M4 servers. I am trying to find the CIMC IP addresses for the blades. I thought it might be Servers > Service Profiles > root > Service Profile Name > General > Management IP, but that just gave me a...
Resolved! LSI Software RAID unresponsive
Hello All, I have a Cisco C240 M4L. I have 2 internal SSD's using the LSI Software RAID card. I have entered into the configuration utility via Ctrl + M. My 2 drives are listed and I have tried a few times to create a new configuration; however, ever...
Resolved! how to install LSI - cisco c22 m3
I'm having trouble installing the system on a c22 m3 server with the LSI RAID, does not detect RAIDI've been watching tutorials, I've got it all sorted out. When installed, it simply does not detect RAIDhttps://www.youtube.com/watch?v=ZKfLK_SeSJg I'...
Hi, I’m looking at purchasing 2 x 6248UP FICs to run in my home lab but are seeing some differences in second hand units for sale. The most notable difference seems to be a redesign of the fan try with a V02 revision. (Plastic handle, and grille mesh...
