Trying to attaching USB external backup Drive to a CISCO 4351 UCS-E180D-M3/K9 UCS-E,DoubleWide,8Core, 1.8 GHzCPU,4 HDD and nit being recognized, new to blade servers, any suggestions, Admins have added the device to VMware - Not recognized
Trying to attaching USB external backup Drive to a CISCO 4351 UCS-E180D-M3/K9 UCS-E,DoubleWide,8Core, 1.8 GHzCPU,4 HDD and nit being recognized, new to blade servers, any suggestions, Admins have added the device to VMware - Not recognized
Hello all. I am trying to use the UCS XML API to retrieve the health status of a blade. The XML request I'm using is: <configResolveChildren inDn="sys/chassis-1/blade-1" inHierarchical="false" cookie="1531708258/f8db41e4-c408-4126-bb27-5b75...
There wasn't even a 3.2(3c) release, as far as I can tell. Everything is working as expected, but the mismatched version is making us scratch our heads. Has anyone else encountered this? UCS-FI-6248UP - B200 M4 (blades show 3.2(3d)) See "Runnin...
Up to now, we had a physically segmented network with internal and external different vtp domains/zones. Internal zone switches have a VLAN set, and external zone switches have a different VLAN set. VLANs are not propagated between different zones fo...
New to a UCS 5108 set up by someone else. The Fans are currently running full speed. UCS Managers showed "Thermal Problems Upper Non Recoverable but all temps seem to be below 40C. In checking the web it could be an IC2 error and suggestions were t...
Hi all, Im trying to update the firmware for c240 m4 server by using HUU but im getting the next error: Note: I trying with the version: https://software.cisco.com/download/home/286281356/type/283850974/release/3.0%25284d%2529 -ucs-c240m4-huu...
Can someone point me to the upgrade path from 2.2(5b) to the latest 3.2 ucsm version? I do not believe I can go straight from 2.2(5b) to 3.2.
Hello all, Hopefully this is the right place to post this question. I'm setting up a new Unity Connection appliance but I'm unable to find where I can set the DNS reference. I would have thought it would be an obvious field in one of the basic set...
I want to make sure I have this right before I begin. Our hosts are HXAF240C-M5SX's running HX 2.6.1d-26761 and ESXi 6.0.0 Our FIs are 6332's running firmware 3.2(3a) and the hosts are running 3.2(3a) I have this downloaded to do the upgrade.CISC...
I cannot seem to find any information on how to do this, as the documentation example is kind of lacking: Server# scope server 1 Server /server # scope bios Server /server/bios # remove-boot-device scu-device-hdd I need to remove the onboard NICs and...
Is it possible to change how the CSR is created on firmware 3.0(4d)? Our internal CA is rejecting the CSR that is generated. After a week of back and forth with them I received an email today that the reason it is being rejected is because the CSR is...
Hi Yesterday, I got a fault info from ucs manager bbu has failed I’m currently using the raid controller model is UCSB-MRAID12G-HE It is possible to use UCSB-MRAID12G instead of UCSB-MRAID12G-HE? If I will change raid controller card, I need to di...
A customer received attached alert on one of their blades. Thay have rebooted the ESX hosted on this blade as well but issue still persists.
Hello All, I have 2 6332 16UP fabric interconnects (FI) with 3 chassis currently configured and operational. I am trying to configure a boot polcy for my C240 M4L. I have the C240 wired and it has checked in to the FI, and I was able to build a pol...
Hi, Anyone tried with connecting ext USB drive to CISCO B200 M3 Blade. Could not seen USB port outside but as per architecture, these should be one internal port. If yes, how we can connect it online. Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-21-2025 07:35 AM | ||
05-20-2025 11:03 AM | ||
05-07-2025 03:02 AM | ||
05-07-2025 12:11 AM | ||
04-30-2025 01:15 AM |