Unified Computing System Discussions

Hello all,I wondered what impact there is to move a service profile which is associated to a server in a UCS 5108 Chassis, from one sub-Organization to another. If there is no impact , should I stop the server before doing so ? Thanks for your help a...

Hi networking guys !Be aware of the following nasty feature. Sorry for any duplicates !This issue is resolved in ESXi 6.0 Update 1a, available at VMware Downloads. For more information, see the VMware ESXi 6.0 Update 1a Release Notes.Walter.ESXi 6.0 ...

Hi, I have an issue on one of our UCS server wherein the LAN 1 is not working. In the past days this was working and the server is accessible on the network.  Upon checking it physically, the LAN 1 is not working even it is connected to a known worki...

Hi, We have Cisco UCS C220 M3 with redundant power supply. PSU 2 is working fine (green solid LED) but the PSU 1 is giving warning (Amber). On the CIMC here's the output for the Fault and logs. What should be the troubleshooting procedure to resol...

Hi guys, I need to mapping 4 vHBAs to a Virtual Machine (VMWARE) to comunicate with the type library. I have tried to mapping using PCI Devices and it works fine (I saw the flogis in my nexus 5K and the VM is communicating with my tape library) but,...

Cisco has issued a separate config guide series for UCS Manager 3.0, specific to the UCS mini.  My question is, is the Mini suitable for use in a training suite, where training is provided for operating a FlexPod Data Center (non-mini)?  What are the...

Hello, I have a datastore disappeared in Virtual machine Vsphere Esxi5.1, for UC . and i have a Two hard drives flashes orange and appeared in status (Failed). The strange thing is all VM's are pingable but i cannot console(SSH) them with error (...

I am having a problem with PowerTool where I get the error Could not find the log files directory if I just run ConvertTo-UcsCmdlet with no parameters. Based on some older posts (2013-2014) with similiar issues I tried to run ConvertTo-UcsCmdlet -Gui...

Hi Experts,I found the below situtation while testing but couldn't troubleshoot. Please let me know where can be the issue UCS B-blade server chassis is connected to JBOD via FI (end host mode) and MDS switch. Created appropriate Service profile and...

Hi, we're hosting a shared customer platform on a pair of fabric interconnects. All ESXi Hosts (5.5) are running on blade servers. The IOMs are connected via Port-Channel to the FI's. The FI's themselves are connected to a pair of Nexus 6000 Switches...

Just to jump into it.We have a 5108 w/ 5 Blades booting from SAN from a Nimble controller. We have the environment up and running but have run into a issue which is as follows;If we are on the host of any of the servers and ping the hostname of the s...

I've successfully enable our UCS Manager to accept users in TACACS+ to log into it, but they are only allowed read-only privlages. I cannot find where to allow remote TACACS+ users the ability to have full admin rights. Does anyone have any idea how ...