Unified Computing System Discussions

Hello,I’m trying to figure out how to configure HA with luci/ricci and Cisco UCS. I’ve added both of my nodes into a cluster in luci, but can’t seem to get fencing to work. In testing this, I found the fence_cisco_ucs command. Running this against UC...

Hello,I'm trying to get VIC adaptor on the blade and its running firmware. I have preloaded VIC adaptor details in my script which are supported for the Cisco UCS blades. For eg, (1240, 1225, 1227, M81KR, etc). So, I need to match any one from this l...

All, We have below scenario, There are two VMs in separate two ESXi hosts (blade servers). Each VM is having two nics connecting to two port groups; production (prod) and heart beat(hb). In UCS, two nics are added to each host and are in active-activ...

Hi,I wanted to configure an ethernetport on one of our FI 6248 (Firmware 5.2(3)N2(2.22c) )for a directly attached linux server. Setting the port mode to access in the configure as Appliance Port dialog and selecting the right VLAN fails with an error...

 I have several C240 M4 servers that I would like to manage as a group.I have installed the Cisco IMC_Supervisor, but it can't find eth0.    ERROR = pcnet32 device eth0 does not see to be present, delaying initializationI need to be able to check/cha...

Does anyone know of a way to allow multiple groups to share the same template (image)? When you go into virtual computing, you're able to assign it to one group, but we want all groups to use that same template. 

HelloI have 1 Cisco UCS 5108 Chasis with 4 Cisco UCS B200M4 Blade servers, VIC 1340, adapter firmware version 4.0 (1c) and the UCS Manager firmware version 2.2 (3c)I have one service profile with 12 VNIC for each blade and I saw the following vmnic i...

Agents state getting changed automatically from NotReady to Ready on random position during break time. Can some help me out?UCCE version 8.5 

I'm trying to get a PAK so I can license UCS Central ... I can't seem to get it, I realize I'm supposed to purchase the free software in order to get a PAK, but I can't seem to do so.  Can anyone help?

I cannot boot my blade to the iscsi boot lun after a patch and reboot. running esxi 5.5 and b200 m2 iqn is correct. any idea? I am stuck here.  here is what I got from ucsm adapter 1/1/1 # connectNo entry for terminal type "dumb";using dumb terminal ...