Unified Computing System Discussions

Hi community,Here i configure in UCS booting from SAN,We created 2 vHBA-1 and vHBA-2In vHBA-1(PRI)Primary SAN traget-xx.xx.xx.xx.xx.xxSecondary SAN target-xx.xx.xx.xx.xx.xxIn vHBA-2(SEC) Primary SAN traget-xx.xx.xx.xx.xx.xxSecondary SAN target-xx.xx....

Hello, since i upgrade my central in 1.3(1a) I have a pb on clock of UCS Central, not for clock in domain definition.In GUI I defined TimeZone "Europ/Paris" in "Administration", "General" (old GUI). But this GUI and CLI show a PDT clock not CEST as b...

Hi, We lost one of our FI part of the cluster environment and new FI is being shipped. What is the procedure I should be following to add the new FI to the environment? My understanding:1. Power ON the new FI, IP it and verify the version.2. Perform ...

Hello All, i am getting below error when access UCS from monitor and from CIMC: Please tell me how can i fix it as i tried given document but it is not working for my server..as given steps.http://www.cisco.com/c/dam/en/us/solutions/collateral/data-c...

Good morning, I am installing the UCS Central 1.3. When i access the new HTML5 console, all of the variables appear with the symbols: ??¡¿¿I have tried with Firefox, IE, Chrome, all supported versions, and all with the same result. I attach a pic. Is...

Hi,we would like to perform an upgrade of our two Nexus 5548UP from 5.1(3)N2(1b) to 7.0(5)N1(1).Unfortunately our server team just told us, that they are worried about their UCS/FabricInterconnect. They have following HW/SW in use:UCS Manager: 2.1(1e...

quick question, do I need to setup vsan on the FIs if I am connecting a pair of brocade dcx to the FI?

How do I use the powertool to get the mac address of vnic0 which will be my pxeboot nic which I need to make a reservation into dhcp so that the blade can pxeboot the first time

All,I have UCS Central setup up and working with two UCS Domains using the default certificate in UCS Central.  I created a signed certificate to use for https and uploaded it.  I committed https to use the new signed cert but now the UCS domains fai...

Hello, I have a UCS 240,y the vSwitch configuration I only have 1 vmnic0, I need to configure teaming / failover, but my question is, if I add a (vSwitch0 Properties-->Network Adpaters,) second vmnic1 will I have any connectivity issue?  Thanks.