Resolved! adding second PSU to ucs C220 M5SX
i have a business edition 6000 C220 M5SX and i need to add a second PSU to it , will inserting the second PSU cause the UCS to restart or cause any sort of live service effect?
Forum Posts
I have an S3260 storage server with 48 5722031MB (5.47TB, or '6TB' marketing size) disks. I'd like to make a single RAID 60 LUN that spans the entire set, but so far the largest size the UCSM will let me make is 50000GB (roughly 48TB), which seems li...
What is the difference between the C220 M4 and the C220 M5 Rack servers?
Hi, I am trying to get the ucs powertool commands for LAN Uplinks Manager using ConvertTo-UcsCmdlet but somehow it is not running on my system. Is it possible for anyone to capture the powertool command for the below GUI action using ConvertTo-UcsCmd...
Hello, i have cisco c240 m3, windows 2012 R2 , firmware 1.5 (3d) . im planning to use the 10g network for backup operation. the devices are showing under network adapter (Intel(R) Ethernet Server Adapter X520-2) . i tried to install the drivers from ...
We're just rolling out two UCS pods and using Central to manage the policies/profiles/etc. Having an issue now where I create a Service Profile from a Service Profile template, and that Service Profile does not get any WWxx/MAC information associated...
Hello all,I'm setting up the logging for Nexus 5k/7K, and after following the guides + this article https://supportforums.cisco.com/community/netpro/network-infrastructure/switching/blog/2010/11/18/nexus-7000-acl-logging-oalI wasnt able to see the "d...
Hi, We have multiple port channels configured on FI-A and FI-B to the upstream switches. Now whenever we need to add a new VLAN to UCSM, we need to allow that VLAN into one of these port channel in UCSM for both Fabric A and B. Now I would like to ch...
Hi, I would like to find out the list of VLAN's which are allowed on a particular Port channel using powertool. Please help me with the powertool command to find the above mentioned details.
Resolved! KVM console launch issue
I have a UCS c220 M3 where I am trying to install on the HV. The current version on the CIMC is 1.4.6. While on the CIMC, I hit the "Launch KVM Console", but the KVM does not launch, the only response I get (while using Google Chrome) is that I get a...
All,I have an issue I have been fighting for about a week now. We have our chassis connected to two 6120's. The 6120's are trunked to a Cisco 4900M switch.I appear to have an arp issue that I can't resolve. It could be a VLAN tagging issue also.I ...
Hi All, We are encountering a very strange and frustrating issue at the moment with our ESXi 6.0 hosts that are hosted on B200M4 blades on UCS Mini environments. I am hoping someone has seen this issue before or can help. Daily, with what seems l...
We are preparing to deploy our first HX stack consisting of 2 6248UP FI switches and 8 M5 hybrid nodes (SSD for read/write cache and spindles for persistent storage). I see that Data Platform 3.5(2a) is the Cisco suggested version, which is interesti...
Greetings! I have a number of C240M5 chassis with the VIC 1455 cards; Is there a way to configure this vic card for the following scenario: Standalone chassis (i.e., not connected to a fabric interconnect) All four SFP ports are usable for assig...
Hi, We have cisco c240m4s server running with 4.0(1c) FW and it’s installed with esxi 6.5 where in I mounted FW ISO image of 4.0(2c)and tried to boot from ISO to upgrade FW,but server is nor booting from ISO image ,it’s giving an error that Loading i...
