Hi all, I have a problem with Cisco SPA112 ATA. I can make calls no problem. When someone calls the number configured on ATA, analogue phone attached to ATA rings but when I answer, I do not hear anything. The calling party still gets the waiting to...
Hello, I'm developing a new VoIP project with Cisco SPA 514G IP Phones. Firmware version: 7.5.7s Currently my customer is in the testing phase and he's warning me that something goes wrong because with older Thompson IP phone doesn't hapen. He ha...
Cisco SPA504G & SPA508G display time 1 hour behind after an hour online. When I reboot the phone it displays the correct time for 1 hour… after that hour it displays the incorrect time. Currently running software version 7.5.7s. DST Rule: start=3/...
On 5/2/16 a lightning strike destroyed our existing modem incorporating VOIP. We replaced the modem with a D-Link DSL-2880AL modem router that did not have VOIP. So we purchased a Linksys PAP2T-NA analogue telephone adaptor (ATA) and connected our ...
BE6K-ST-BDL-K9-RF BE6000 UCS C220M3 MD SrvRST 9.xSW Hyp UPM VCS REMANUFACTUREDCAB-9K10A-UK Power Cord 250VAC 10A BS1363 Plug (13 A fuse) UKR-CBE6K-K9 Cisco Business Edition 6000-Electronic SW Delivery-Top LevelBE6S-SW-10.X Business Editio...
Hi all, I'm having an issue with a 525G2. It scans for bluetooth devices but never finds any. When trying to pair from my iPhone to the Cisco, I get to a passcode but the passcode always fails. I've captured the syslog and I'll post it here short...
Hi,we are experiencing a big trouble with LDAP search.We have set to phones: one 504G and one 525G.We are trying to do lookups with the same configuration.SPA525G is working fine. 504G hangs on "Requesting Directory from LDAP Server...".More: 504G do...
After several configuration rounds, almost everything seems to be working on my VoIP setup using the Cisco Linksys PAP2T-NA. The only issue I am currently experiencing is that anyone calling my number won't get a ringback tone, although my phone ring...
Hello,I live in Portugal, and have a SPA3012 connected to a PSTN line of Portugal Telecom (via the FXO port), and a normal telephone connected to the SPA3102's FXS port. During an incoming call on the PSTN line, the phone rings and shows the caller I...
Hi all, Functional and in use SPA 112. Today though, came home from work and found the power light flashing continuously. No response to **** over phone through line1 No response to any network pings (network port light not illuminated either). Press...
Hi everyone, I bought the SPA504G and I noticed an annoying problem. I start with saying that me and the other party use only the G722 HD codec. During a call if I talk while the other is talking, the voice of the other party loses quality, like if ...
Hello, I have a SPA525G2 and I would like to know if it's possible to start recording calls automatically at all times. Thanks
Hello all, I have a SPA 122 ATA that I use to allow an old analog Polyspan Soundstation to connect to Asterisk via SIP. Seeing the Asterisk logs, I see that when dialing a number with the analog phone, certain digits are sent twice by the ATA. E.g., ...
Hi All, My question, how to set up UCM 520 provide automatically extensions and registration the connected phones? Thank you! Tony
Spa504G phone is on Firmware 7.5.7. PBX is asterisk 11. The first 11 line keys are set to BLF, Speed Dial, Call Pickup, they work just fine. The next set of line keys are set to Speed Dial only: eg: fnc=sd;sub=1XXXXXXXXXX@192.168.3.254 These line k...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: