Voice Systems and Accessories - Small Business

I have the SPA232D with SPA302D dect phone . basically I want the PSTN line ( Main line ) to ring on the Dect Phone as well as be able to forward PSTN to VOIP as soon want to transfer the line PSTN to another locations VOIP number with caller ID tran...

I'm looking for some hardware that works ATA FXS and me to have 4G LTE communication .. if I could exist?sorry for my bad English..

Due to any reason (accidental factory reset or ungraceful shutdown),  you may run into the issue of VMware  eval License warning. No need worry, VMware license is shipped with all BE6000 boxes, provided it was orderd as BE6k bundle such as "BE6k-ST-B...

Hello, I have an issue where ten SPA525G2 phones are displaying a date ahead. when putting the IP addresses into the browser of the phones and going to the management page, the time is correct and on the UC560 that is managing the devices the clock ...

I have 2 different models of Cisco routers configured to work with Asterisk/FreePBX. One is the SPA3102 Voice Gateway and the other is the SPA232D Multi-Line DECT ATA. The SPA3102 seems to work well with both VoIP and PSTN lines. However, the 232D be...

Hi,I don't want links to stuff you've found on Google, because I've probably found those docs already.  I've seen/tried this one (http://www.aoakley.com/articles/2008-01-08.php) ... this one (http://wiki.aa.org.uk/VoIP_Phones_-_Cisco_SPA) .... this o...

Can someone tell me how to set the DSCP values in a SPA504 or SPA942?  Or are they already set to some default value?  I don't find a way to set them in the phone's GUI. This Cisco document lists the DSCP values to use: http://www.cisco.com/c/en/us/...

Has anyone seen and resolved an issue where a brand new SPA504 with firmware version 7.5.2 won't upgrade or downgrade?  I have tried using my provisioning server to force the upgrade/downgrade with no luck and I have also run the SPA5X5g Firmware Upg...

Recently installed a UC540 and I've noticed that the UC540 is severely capping our broadband speeds.We have a 100MB connection here presented by a virgin modem.When connected via the UC540, the best speeds we see (with inspection & ACL's disabled) is...

Dear all, How do I make redirects each incoming calls from PSTN lines via the FXO port 0 to port FXO others already incorporated (I mean port 1 until port 3 made into one port group? So the core of my question, how to make redirects call the FXO port...

The "**#" trick to "unlock" that I could use on the 50x series no longer works on the 514g.  Maybe it's because the firmware I tested that on was 7.4.8a and the 514G doesn't go below 7.5.2b. Anyone have any ideas on how to factory reset, or change t...

Is there a way to turn off the following tone: When i'm calling on my Cisco ATA-112, i hear a tone when someone else is ringing me on that line. I get the tone every couple of seconds during my call, till the moment that the person that calls hangs t...

Hello- Does anyone have a caller receiving feedback when they call in?  I've had multiple people tell me there is feedback when they call in and I'm on my headset. Is there a solution for this? Thank you!