Voice Systems and Accessories - Small Business

Hello there, I am new with UC 500. I have set up UC 540W with AA option and forwarding incoming calls to operator extension with no caller action . We use PBX FXO ports only. I have issue with outside caller. Once outside caller calls, and if no one ...

Hi I recently purchased a Cisco UC520-16U-4FXO-K9 and I am having some issues connecting to it. It starts up and all the LAN ports all light up green and then go out in 30 seconds. I connected an ethernet cable from the UC520 to my laptop and it is n...

Hello, I have UC 540W-FXO-K9 with latest Bin 8.6.2 and new SPA 504 G with latest firmware 7.5.7s. It seems the Phone can register with UC 540 with no issue. However, I cannot hear any dial tone when I pick up the phone. However, once I dial the exten...

Hi, i have a CIPC 8.6.4.0 on a UC 500.Some weeks ago i did some test and succeed to test calls. Today i'd like to have it under production and openned it again to have a last test before installing on my co-workers and now i have "registering" turnin...

I will be setting up a UC560/UC540 multi-site solution, and would like to know if anyone has setup multi-site with three digit extensions. The two sites currently have two digit extensions, i would like to make them three digit extensions and be able...

Hi,Could you list on your opinion, the advantages BE6000 over CME running on router? Tks

Hi Everyone,We have recently changed from Linksys SPA942 handsets to the newer Cisco SPA504G.Happy with the handset, however have found one "flaw" (in our minds). Our previous handsets had Dial Assistance available, in the preferences menu.It says on...

Does anyone have the administrator password for a Linksys SPA941? I have tried all of the passwords my phone provider (RingCentral) would have used yet none of them work.  Since I purchased it from them in the first place, I figured one of their pass...

Issue: I would like for only 1 call to come in per phone. For example ext 2 and ext 3 should be disabled. Ok. so I figured out how to disabled ext 2 and ext 3 on our cisco 303 phones..BUT when I dial my phone ext 1 will blinks for a second incoming c...

WHEN SOMEONE MADES A CALL, SOMETIMES IT TOOKS SEVERAL TRIES (REDIALS) TO HAVE SUCCESS. WE HAVE AN E1 WITH 10 TRUNKS.

Does anyone know how I can disable/remove the ignore button on the Cisco 303G voip phone?We have users that like to ignore phone calls and this would solve my issue. Any help would be GREATLY appreciated!!! v/rPedro Becker

We use a lot of Cisco SPA 303 / SPA 504 phones with SIP TLS / sRTP.Now we have very big problems - if on our PBX system failure or failer on network connection from phones to PBX  - this phones suspend. In this mode phones can't react on actions from...

When I set Default Character Encoding in the web config (or by provisioning .xml config file) to UTF-8, after pressing Submit All Changes phone reboots.After reboot the setting goes back to ISO-8859-1 and russian dictionary does'nt work.Software Vers...

Phone has support for multiple languages. The particular language can be selected in phone menu by a user. Unfortunately it seems that XML Application environment is not multi-language ready.Despite user's preference, the phone ask for English varian...