Voice Systems and Accessories - Small Business

Everything on my UC520 works perfectly except this!  We upgraded our Internet and got a Static IP.  The modem for the speed we have is a modem/router combo but can be used as a bridge.  I just have to have the Cisco do the PPPoE authentication.We pre...

I have been keeping the fax machine separate from the UC500 for all of my deployments but now I need to know if I can put a fax machine on a FXS port. I am configured with a PRI circuit.

Hi, i was having some troubles with the comunication between two points wireless, the problem solve when i add a SF 300-24 Swithc on the second point and giving the correct VLAN to the phones but now i have another problem. the comunication between t...

The SPA50x-30x-7-5-3.exe firmware upgrade utility does not connect to the SPA502G phones.I'm on the same LAN, can ping the phones, and can change the phone settings via the phone Web GUI but the firmware upgrade utility does not connect to the phone....

Hello there,I am testing out the provisioning manager and have come across a spot where I need some help.Under Sites and the usage profiles i try and click on "Deploy Site"and it gives me a message "Please check the device status"not sure what i need...

I have a few 525G2 units running 7.5.3 and they are provisioned using .cfg files located on a http server, i have no real issues but a few months ago i came across a problem where none of the phones would process the .cfg files.I located the reason f...

Guys, I have a site where cca can not authenticate with a uc520. It states authentication failed and TELNET access was denied. Of course I can manually telnet into the device. Anyone see this before? Sent from Cisco Technical Support iPhone App

Can anyone explain me why we need call preserve in H323?????????voice service voiph323call preserveConfiguring media inactivity detection to avoid hung calls is highly recommended.after configuring the call preserve in voice service voip i got the ab...

Hi all.I have read a lot of documents and applied configuration changes to the voice-ports in my UC-520 but until now I can not get to work the incoming Caller ID function; I think it is a matter of matching parameters with my telephony company: Telm...

Having issues with License registration on BE3000. Get the message attached.Help??

We recently purchased 15 504g phones with 500s attendant consoles.  We have a Ring Group (extention 300) which rings the sales phones (5 extentions) when an outside call comes in.  I would like to be able to answer that group should someone be in ano...

Hello!Are CMBE 3000 support wireless IP phones 7920 or 7921G?Thank you!

Hello,I can't seem to be ab;e to edit the default Inbound Calling Route. I also can't seem to be able to add a new one since the button is disabled. Any ideas? TIA.

I have a client who says he has seen this before on a UC520 w/ 7975s, and he wants it repliated on his UC540 w/ 7975s. i.e. an incoming phone call from an access gate on an FXO port would cause the phone to ring, and force a page flip to a services U...