I know I can go build a "cantenna" or other DIY stuff but does Cisco offer a retail solution to better omni-directional or directional range for the UC320W? For example, if the UC320W (or any Wi-Fi AP for that matter) is in the corner of a building,...
I've hit a wall with the FXS port on the UC320W. (mixed mode, current firmware, one FXO and one FXS in use, 2 SPA phones)I connected an existing internal line to the FXS port with several old phones (also tested with one phone direct of course) and ...
Hi,I have Linksys SPA400 and can't get Caller ID on incomming calls. Waiting for firmware that will fix this over 2 years.I use this adapter on 2 installs: one with SPA9000 and one with Asterisk. Same problem with both.I am from Bulgaria. Telecom ope...
We have replaced an old Cisco ATA188 SIP with a new SPA2102.After this substitution we encountered a Caller ID problem.The analog phone connected to SPA doesn't show the CID any more.We have tried every possible combinations available on the SPA with...
Quick Question: Am I missing something?Looking over Call control and audio features on UC540 and SPA525G2 5-Line IP Phone-• Music on hold1• Shared/bridge line appearance1• Call pickup - selective and group1• Call park and unpark1• Intercom1• Group pa...
I have configured a UC520 using only CCA. Defaults were used in most cases. The UC520 is receiving Internet via DSL modem at the WAN port and is configured with Static IP. The computer I'm running CCA 3.1 is able to hop online just fine, plugged dir...
Is it possible to program the soft keys on an SPA303 which is attached to the UC320W? I would like to make the "Pickup" key the second key by default.
On a generic SIP server implemenation, has anyone had an issue with SPA8000 and echo issues. is there a setting for echo cancellation.thankspeter
My goal is to basically have a night service button/softkey on a SPA phone. Is there a way to create a softkey or a button on a SPA5XX phone that will automatically call forward all to a specific number? For example, a user just pushes a softkey and ...
Is there a way to toggle UPnP on and off on the UC320W? I have need to sometimes disable this for clients and I can't find the option. It appears to be on by default (but seems a little slow to release mappings when requested).Thanks.
Hello.Do Cisco UCM Business Edition 5000 and 6000 support sip-phones from third-party manufacturers?Thank you.
I have several android phones in a customer location and was asked by my customer if SIP under Android would be supported on the UC320 platform. Having this could be quite useful and I would like to have it added to the feature request list.
Hi All,Today whilst working with SBS trying to troubleshoot a problem with a reception phones (SPA-525G2 with 2X 500s Modules), nothing in the obvious could be found, until the support call ended (Murphy's law they call it).The Issue:(SBS Case# 61858...
I have a customer who says that the music on hold is too loud for people calling in to her office. Although she could connect an external source and control the volume at the external source, she wants to keep the music source internal.My question i...
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: