I tried with both my land line as well as my mobile phone and found that I did not have to check the ‘Allow External Transfer’ and was able to dial by number at any time. I am using your custom script ‘AA_SBCS_v03.aef’ per ‘TEL27a_Alt_Greeting+Dial_b...
Hello !Is there a way to integrate SPA301G into UC560 by using SPCP?UC560 is not "recognising" SPA301G phones , but they are "supported"?Is there a exact way to integrate this solution?Thanks for answers in advice.
Using CCA 2.2(5), I have been adding my extensions and caller ID numbers to override the default caller ID in my outgoing dial plan. Once I hit 14 extensions, I cannot add anymore. Is this a limit? Should I be doing it somewhere else?Thank you.
Hi,I configured the new SPA504G with the extension created asterisk server. It took awhile before the lines turned green. Is there a register to asterisk time interval that can be set to least on the 504G?
UC540Software PAck 8.1CCA 3.0I have tried this on two UC540's with the same resultsI want to dial out on fxo port 0/2 if 0/0 and 0/1 are being used.In outgoing dial plan I choose the sequential hunt scheme and vertically order the fxo ports with the ...
Sorry if this has been posted already or in a release note, I just have not found it yet. I have been looking into an issue with background images not showing up from my test phone with the 8.1 software pak. I see the pictures and xml files in the ...
Has anyone been able to figure out the setting that needs to change to allow a PC to connect to an external PPTP server from behind the UC500? I've had no luck in this and have allowed GRE passthrough and setup pptp inspect rules. Still no love.
Hello,I have UC 560, I need to change background image on my IP phone 7965, when i select the image from user preferences, background images i can see my current image on the phone, but the image which i copied through TFTP look like as a screen with...
Hey guys, Looking for a way to program one of my line keys to do a In-Call Call Record (*1)Have the key flash red (identifying that its Activated) and press again to show not recording.First is the function of actually doing an incall recordfnc=blf+s...
A customer was upgraded to the 8.1 Software Pak and now the spa525g phones send a beep to an outside caller when the mute button is pressed. How do you turn that off? Where is the release note that describes this change?Thanks
Hi everybody! I need your help. I want to change the default wallpaper for our business logo and I want to force all phones in my network to display this wallpaper. Can you help me?
When all of my Cisco 509g phones boot, they generate a syslog error message (see below) that says SCCPTCP:ERR:Can't bind to c0a801d0:5060 errno=49.Local0.Info <IP Address> SCCPTCP:ERR:Can't bind to c0a801d0:5060 errno=49The immediate message after th...
Hello,I have a AA script at a doctors office that is supposed to transfer to an answering service after hours. It used to work just fine when they were using analog lines. I recently moved them to an ISDN PRI and it stopped working. Same script, s...
I notice that the version 7-4-6 release notes indicate support for Broadsoft directed call pickup but I do not see any information on how it is configured. Anyone have it working? Is it supported on the 500S as well as phone line-keys?
when the customer is on a call and the second call rings in the is a loud beep. can this be turned off?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: