VPN

I have three sites connected to each other by L2L VPNs - Site1, Site2, Site3.  Each site has its own ASA 5510 and RemoteVPNs have been configured on each as well.My problem - When a remote user connects to Site1, he or she can only access resources t...

Having some trouble connecting to the servers through the ASA 5505 with RDP from the outside network. I can ping the router outside address but i cannot ping any other outside address i assigned to the servers. I've tried different natting conf and r...

I know this topic has been beat to death, but I've beat myself to death trying to get it to work. I had this working, but didn't save, then the FW did a reboot when the breaker flipped. I can log in with the VPN client. I can't reach any of the LAN r...

Users are not able to connect from the outside.The VPN address that clients use from the outside is 173.14.170.113The VPN address on our inside network is 192.168.0.13I have set up the ASA for my VPN as follows:access-list acl-out extended permit tcp...

So I need to add a new user into the ASA 5510. What all do I need to add in in the command line to give them access when they use the VPN client?

Very weird:My crypto session with ZZZ.ZZZ.ZZZ.ZZZ. apears three times .... mdz-gc-he-asr#show crypto session brief Status: A- Active, U - Up, D - Down, I - Idle, S - Standby, N - Negotiating         K - No IKEivrf = (none)           Peer     I/F     ...

Hello Everyone,My customer has a ASA5510 that I have configured as a remote VPN endpoint for remote laptop users who connect via an IPsec tunnel using Cisco VPN client software.  The remote VPN is configured as a split tunnel VPN.  Once the user conn...

hi ,i  have found that users can decryp group password from  the PCF file of the vpn client .i want to know with wich protocole the client VPN crypt this passord and how can i  solve this issue .best regards Yassine

We need to add these lines into our ASA to adapt a cloud service tunnel. And those first two lines are not in the current ASA configuration.Can anyone help me understand this impact to L2L tunnels which are in session? I assume they're defaulting to ...

I have configured, well i attempted to configure my side of the tunnel for a site to site vpn, The other side is waiting on configuration. Someone else is doing the other side, but is there a way I can see if my side is even trying to connect?show cr...

Hi,I'm trying to set up different types of VRF-aware VPN and I have a problem with below one:FVRF=VRF1 and IVRF=global, no VRFthere  are 2 routers with Loopback1 (global VRF) and gig0/0 (vrf FVRF). When I  ping between Loop1's I see ISAKMP and IPsec ...