Hello allI am looking to NAT the public IP of a peer end to create a site-to-site VPN tunnel that will replace an existing VPN tunnel.Basically, the current tunnel between Peer A and Peer B1 (200.x.x.1) is up and functioning. Peer A is unable to be c...
Forum Posts
I want to configure ipsec on the router. and want to use crypto isakmp policy configuration, however, the configuration is not available on the router I'm using. It is impossible for me to change the router I chose, because I am in the middle of a la...
I am trying to replicate configuration from a 2800 router to a 4331, I noticed that both pseudowire and xconnect are unsupported, Is there any alternative.
Hello.When routing split tunnel traffic inside the Anyconnect VPN-- in addition to the split-tunnel ACL, must I also create a standard ACL "permit" statement for this newly authorized traffic on the existing ACLs on the inside and outside interfaces?...
I have a persistent issue with AnyConnect on my Windows 10 laptop ever since I started keeping my VPN connection on all the time.I put the laptop to sleep in the evening with AnyConnected connected to my VPN. But when I wake up the laptop from sleep ...
Resolved! Cisco Anyconnect Client Settings?
Hi,I have Ike policies setup for anyconnect on our ASA. Where would I go on a windows client using anyconnect to setup these same parameters? Hopefully I am saying that correctly. I would need to configure matching settings on the device also correct...
Hello.I am new to ASA OS configuration. I am troubleshooting the failing code below...#object network VENDOR1 #host 1.1.1.1#object-group network VPN-Vendor-IP #network-object object VENDOR1#access-list Split-Tunnel extended permit ip host 1.1.1.1...
I am trying to establish a VPN tunnel between a Cisco ASA 5525 running version 9.8(2) and the AWS GOV cloud. The AWS GOV cloud requires the use of IKEv1 with DH-Group 14. However this is not possible to do on the ASA with IKEv1. You can use IKEv2 w...
Hi, we also want to use DH14 with ikev1. Is this on the roadmap of any new ASA Version? Thank you
Resolved! Download Anyconnect "button" not working
Hello,Probably a n00b question:Download Anyconnect "button" not workingI can access the ASA from URL, login with user credentials, but download button does nothing. Inherited infrastructure, need IE compatible mode in edge to view page, just got acce...
Hey guys,I have a problem which I have been struggling with for quite a while, I'm trying to establish a vpn connection with 2 asa firwalls in cisco packet tracer. However i'm not having any luck. I will upload my config of each device. Also this is ...
Hello,Equipment: Firepower FTD1120 - V. 7.2.0-82Good morning,I have a functional site-to-site between my client and their provider, but the prints don’t work from the provider-side application to the client-side printers. (Port 9100)So I’d like to ac...
Resolved! DMVPN over IPSec problem
Hi, I have 2 DMVPN tunnel over IPSec with 2 two spoke.One tunnel everything Okay. Tunnel UPBut second tunnel problem. DMVPN state IPSEC. I am getting these logsIOS: c1100-universalk9.17.06.03a.SPA.binRouter: cisco C1101-4PLTEP (1RU)Interface: Tunnel1...
Dearsif i m using a AnyConnect vpn to connect to corporate, it is creating a vpn tunnel from the pc to asa firewall on the perimeter, My question is that if the user pc is infected from malware that malware can travel to the corporate network and it ...
I want to know if I can be able to use my wireless printer when connect to VPN network.
