A VPN client is successfully connected, can't ping to any internal network. I got here a show crypto output ... my config was never changed and was working before. sh crypto ipsec sa | beg 12.193.124.74 current_peer: 12.193.124.74:42679 dynamic a...
Hello All,I am experiencing a strange issue on a VPN LAN-to-LAN tunnel between two Cisco ASA firewall.Whenever a remote side tries to connect to a local server over the VPN tunnel with a TCP connection (an HTTP browser connection) all incoming SYN pa...
I have a problem that is driving me nuts.Here is the pertinent information first...Windows 7Cisco AnyConnect SecureMobility Client 3.0.4235Cisco ASA 5510 firewall 8.2The problem is.....When I log in, the client does its start-up bit, and then display...
Good afternoon everyone,I'am a newbie at configuring cisco routers, I had made a few month ago a VPN tunnel between 2 sites. Site A had the VPN server on a cisco SR520-ADSL-K9 network is 192.168.1.0 (public IP is 80.11.82.100 (not real). Site B is th...
guys suppose we have a VPN to a different site and we would liek to to encrypt the data so normally we make an access list which is used for interesting traffic and used in cyrpto mapso my network is 10.1.1.0/24 and remote site is 10.2.2.0/24.....so ...
Hi,i have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.any ideas?thanks
Here is my config... VPN is 172.16.4.0/24 and Internal network is 10.10.50.0/24. Once I am connected to VPN, I cant access the 10.10.50.0 network.!crypto isakmp policy 10 encr 3des hash md5 authentication pre-share group 2!crypto isakmp client config...
Hi Folks,I'm trying to achieve two factor authentication, first with radius & 2nd with self signed certificate. Though I have generated self signed certificate & trying to import that certificate but error 39 occuring. Only hindrance authenticating w...
Android tab is unable to select the identify certificate out of the keystore. The certificate functioned correctly on a desktop and iPad.Here is were I loaded the cert.
Hello all. I am purchasing 2 5512x ASAs to be configured as an Active/Passive pair as a VPN device. Do I need to purchase anyconnect licenses for both devices? Thanks,
Hey guys, I need a little assistance from the experts. I am configuring VPN on an 831 rotuer using a dynamic-map configuration. I can connect to the network and I can see phase 1 and 2 complete from the debugs however from what I can tell I can only ...
Dear All,I have a requiremnt for site to site VPN configuration but the remote end firewall doesnt got Public ip ,public ip is termintaed on the router. please find the attached diagramLAN -->Firewall-privateip --> Router-publicip --ISPhow can i setu...
I have a cisco 2900 series building a site-2-site vpn tunnel to an ASA 5510. The tunnel establishes just fine but I am unable to get traffic to flow through the tunnel. I have read several other posts and tried many of the suggestion (probably ...
I am trying to configure a VPN tunnel between my client network 192.168.190.0/24 and a remote site 66.18.106.160/27. I need to NAT all traffic leaving 192.168.190.0/24 to 192.168.191.0/24.Here is my current config:hostname xxxxxdo...
