VPN

I've got a question here that I don't know the answer to off hand.I've got a remote site that is a small office.  There are no servers(Active Directory) at that site, though there is a local file store.  The site has a l2l tunnel back to HQ, where th...

Hi,I'm trying to get CoA working on a 7206, and although it seems a fairly staright forward setup, I just can't make it work.  Here are the following details that I have.I'm using CoA Client (version 2.6) to do the testing.   From the 7206 I get the ...

Hi All,I have a customer recently start installing cisco any connect versio 3.0.08057 , he said it crashing , any idea ?vpn.ehealthsask.ca)][Tue Jul 31 16:46:05.646 2012][libcsd][debug][hs_transport_winhttp_verify_cert_hash_check] Fingerprints match:...

I need to set up a site to site vpn between 2 ASA (1 5510 and a 5505).  The 5505 internal network is also in use on the internal portion of the 5510 so I wanted to NAT the outbound traffic from Site A (5510) to Site B (5505) and vice versa.  I was th...

I have several remotes sites connected to "home" with Cisco 891 routers at each remote site."Home" actually consites of two different data center sites, each with a Cisco 3845 router terminating the IPSec tunnels there. One home site provides VOIP ph...

I am trying to create a SSLVPN connection using Cisco Anyconnect Client after entering username and password, I am getting following error message in attached screenshot. I already created a ip local pool vpnpool 192.168.60.10-192.168.60.15 mask 255....

I recently changed out the ASA5510 at the head end of my WAN so I am not sure if this problem is related.I have 30 or so 2800 series routers connected to the 5510 with ipsec tunnels and 4 asa 5505 units connecting with "ezvpn".  When I look at loggs ...

I'm trying to remotely connect a Windows 7 Home machine to our network. I installed vpnclient-win-msi-5.0.02.0090-k9.exe on the machine and plugged in the network info. The program seems to run fine and I get the "locked" symbol in the taskbar. But t...

I had to edit an ACL on an active S2S VPN today because traffic was being denied from a host onsite to a host on the remote site (port 449).  After I made the change, we tried to make the connection again, but it was still denied.  Do we need to tear...

Hi, Reading the DMVPN design guide I found: "qos pre-classify is not supported in an architecture that implements two different headends for mGRE tunnels and VPN tunnels." http://www.cisco.com/application/pdf/en/us/guest/netsol/ns171/c649/ccmigration...

Hello - I have been working for the past few weeks on implementing our WebVPN (Clientless SSL VPN) solution and we just about finished except for one issue we are running into.  We have a bookmark list that we have enabled the auto sign-in server lis...

Good Morning,We have multiple Site-to-Site IPSec tunnels created. Currently we are using 2 ISP Links and bonding them using a Peplink Balance 380.  We have this configuration at multiple sites. Currently if the ISP connection (which is where our peer...

Afternoon all,We have a cisco 800 in a remote site which we wanted to use for a site to site vpn.  I thought this would be simple as i have setup ipsec and ssl vpn's before on ASA's without any issues.  This has gone so wrong that i think its best ju...

HiI'm hitting an issue as described in the following Cisco bug:CSCub10948 Bug Details Hostscan returns "elevationrequired" during DAP Symptom:After upgrading either CSD or Hostscan  clients which were able to connect before are no longer able to do s...