VPN

In new features listed in ASA release 8.4.2 at http://www.cisco.com/en/US/docs/security/asa/asa84/release/notes/asarn84.html,I see "Split Tunnel DNS policy for AnyConnect" which might be of interest to us.  In the description field , it says " It ins...

hello guys , i have started managing a asa 5510 firewall which is already having 10 ipsec tunnels , the problem i am facing is they are configured as "ipsec vpn map" i have attached sample config . , i am finding it difficult to understand the parame...

Hi Experts,We have a ASA 5505 in our enviroment. We already configures two site 2 site VPN to our branch offices. Now we are planning to configure remote access VPN. So what should be consider when configuring the remote access VPN in ASA which alrea...

I've setup a site to site vpn on an ASA 5510 using ASDM (as I have many times before) and the tunnel appears to be up but I am not able to pass traffic.  When I run the packet tracer from my inside network to the remote destination network, it shows ...

                   Hi All.,,i hve one requirment if you can help me outI have multilple sites connected via site-to-site ipsec vpn tunnel to HQ terminting on the same interface on HQ. Requirmet is to redirect traffic  coming from all the sites to one...

I have a Tunnel setup between two IOS routers that is running in ipip mode.  I need to encrypt this tunnel with an ASA device.  I see the ASA has a protocol called ipinip.  Is this the same thing?  If I select ipinip as my traffic definition for IPSe...

Hi,I set up Anyconnect on ASA5510 and  enabled secure connect in CUCM.I did everything as written in jabber for android administration guide and end user guide.But when secure connect configured on my mobile, secure connect entry never created even t...

Hi all,I've a problem with an IPSec ove GRE Tunnel between a Cisco Router and a Linux Server with RacoonMy goal is that all the traffic that transit from the subnet behind our server that need to reach our Lan should be encrypted (and viceversa, from...

I recently upgraded both my ASA and the Anyconnect software.  I had anyconnect 2.5.2001 and went up to 2.5.3055 which isn't a big jump.I deleted the old from flash and added the new.  However, I did not change the svc image statement.In my testing, I...

Hi guys,I have a Cisco ASA 5520 and I would like  to create a VPN Site to Site.I'm  not a network administrator but I have to do this VPN. I'm using the  Wizard, in the Remote Site Peer window I have to select a Pre Shared  Key. Is this key mine or f...

I am trying to replace a 1751 IPSec VPN that connects a single LAN behind the 1751 to ~45 remote networks behind a single peer.  There are a small number of workstations (~50) and low throughput (< 1MBps) across this VPN, the biggest trouble is the n...

Dear Support,I have created any connect vpn on ASA 5520. The VPN works fine. User is able to connect from its machine either windows or linux. My customer wants to automate the login process. He doesnot want the User ID and password prompt everytime....

Hi,I have setup a VPN connection (with double authentication) in my organisation using the below appliance:1) Cisco ASA 55052) Cisco ACS v5.33) RSA server 7.1 SP4For the VPN double authentication, I have set the RSA as my primary authentication serve...