VPN

*May 23 13:00:49.791: EZVPN(backup): *** Logic Error ****May 23 13:00:49.791: EZVPN(backup): Current State: NO_CHANGE*May 23 13:00:49.791: EZVPN(backup): Event: RESET*May 23 13:00:49.791: EZVPN(backup): Resetting the EZVPN state machine to recover*Ma...

In my Cisco PIX-515E Version 6.3(5), I have a IPSec VPN tunnel and also to the same firewall home users connect through VPN client. I am unable to find a solution that allows my home users to connect to office network and again access the remote netw...

When the phone is connected through the VPN will the PC connected to the phone be on the inside as well?

I have a working site2site between 2 ASA5520 8.2(3)I want side A to be able telnet\ssh to side B's ASAusing the telnet command would do it or should I also add an access-list?

Hi guysive recently setup a EazyVPN on a cisco 3g router with a ASA5520.  the tunnel comes up ok and the remote users can browse the net.The problem is accessing the lan behind the ASA.  when you do a show cry ipsec sa at the ASA you get the followin...

Hello Guys,Can you please check my below site to site VPN config and suggest me as i am not not able to bring up the VPN using show crypto isakmp sa.                                                                                           Fa0/0     ...

I seem to be having issues with getting IPSEC to run when I use  NAT, with no NAT this works perfectly fine but with NAT, the ACL to the Crypto Map does not get hit. I am currently trying to test for a new deployment, as we connect to many 3rd partie...

Hi everybody,I will try to explain in English what I'm looking for even if English is not my mother tong .I am trying to install at house a RVS4000 to connect my PC by VPN at my network everywhere in the world.I am using the QuickVPN client gived by ...

Good morning,IBM which monitors our IPS has reported seeing this error come from our remote sites recently, we are CCM 6.1, with cisco ip 7941 at remote sites and all traffic if coming in via vpn. has anyone seen this type of traffic and is there a ...

HI ,I have an ASA5510 version 8.0.4.I have configured 4 tunnels with 4 different customers with same ipsec configuration. I have activated NAT-T because i have a Cisco 1801 (between ASA and Internet) which is doing NAT .I translate IP outside address...

I've been pouring over a lot of documentation but I think I have a tricky one here.I have my main branch router (3825) and two remote routers (2821's).  They are connected through leased lines that do not touch the internet.  For various security rea...

Hi,I am having problems accessing our internal network via VPN. We have an ASA at the perimeter that connects to a 3745 router and all of our networks come of that router. I can establish a VPN connection to the ASA but I can’t ping any of our intern...