VPN

hi,I am trying to apply GETVPN in an operational enterprise with over 150 branches. The only way to migrate a branch by branch without interrubting others, is through denying each branch in the local deny policy at the GM in the DC.The Local Deny ACL...

Can someone tell me the proper way to setup a S2S VPN where one peer is a dhcp public address and not a static? I realize that this compromises security bit the powers that be don't want to spend the extra money to upgrade from a residential account ...

Hi all,I have an issue with IPSEC VPN between ASA and cisco routerI think there is a problem in phase 2Can you please guide me where could be the problem. I suspect ACL issues on router but i am unable to rectify. ACLs on router is specified in botto...

Hi,A couple of questions about Anyconnect Connection Profiles and Dynamic Access Policies:I have configured several Anyconnect Connection Profiles with different characteristics. I want one of the profiles to be useable/visible only when the Anyconne...

Hello all,first I apologize for my bad english.Here my question:Two companies (e.g. company A and B) use the same internal network (e.g. 192.168.0.0/24) and their vpn devices (no ciscovpn devices) can not translate the network address in a vpn tunnel...

Hi everybody,I have a customer who has the topology shown on the picture below (also attached like a file). As you can see he has two ISP, one for Internet Service and another for WAN service. Also there is 3 remote branch offices that have also WAN ...

Hello,just bought a new ASA 5505 to set up 2 lan to lan VPNs.it looks to me that it is configured properly but tunnels does not go up.asaccb2# show crypto ipsec saThere are no ipsec sasI cannot see any SAs configured even if I DO HAVE configured them...