VPN

Hello,i have a this pix:PIX-506ECisco PIX Firewall Version 6.3(5)Cisco PIX Device Manager Version 3.0(4)I would connect a pc connected trough vpn vs another pc connected trough vpn.My vpn work perfect if i connect a pc and try to ping a pc on lan sid...

Hiplease i need urgent help with my a network design, i want to configure an IPSec on a GRE tunnel so in case of link failure, packets will still get to its destination secured. I have 4 sites running on ospf (in same area) as the routing protocol. t...

I’ve been tasked to establish a VPN tunnel between our ASA5520 and another merging company with a Check Point on Nokia platform.  I’ve got a list of IKE and IPSEC parameters from the Check Point unit and it’s external IP Address.  There’s also a pre-...

Hi all,I have a cisco 1841 router which is connected to a partner site via site to site vpn.Our partner has given us ip addresses of 2 remote peers that we can use to establish the site to site vpn for backup purpose.On one occassion, our router was ...

For the ASA 5510, the inside nic IP address is 192.168.1.1 and the outside nic is connected to a public ip address.Through a router that is connected to 192.168.1.0 network, we created a subnet of 192.168.2.0 network andthat all computers behind the ...

What is the way to set up vpn client tunnels so that the client get's assigned the same IP from the ASA5510 every time?I'm assuming I would somehow define a pool with one IP address for each user and then somehow specify to use that pool in the user ...

We are working on a solution to try to provide tighter control over what internal devices are accessible through VPN connections. We are trying to find a way to deliniate access based on whether or not the client connecting into our VPN is a member o...

I am can't find a Cisco VPN client to run on Windows XP 64 bit. Any suggestions?Thanks

I have a ASA 5520 on my local side and a 5510 on the remote end of my connection. on the backside of these I have MWR 2941's. On each 2941 I have a 172.22.117.0/26 VLAN. How can I push this link over my IPSEC L2L tunnel? What would my access lists lo...

Is there a VPN client for linux SUSE 11.3?Thanks,

Hello, I got a biiig problem with some of my users. They are trying to watch live streams from the net, but the stream is apparently being chopped up all the time. There aren’t problems when they watch things on YouTube. They noticed the problem when...

I have a Cisco ASA5510 running 8.2.2.  I am tasked with needing to have users authenicate with RSA tokens.  Easy enough to setup once we got the RSA server and tokens.  Now I am faced with the problem of controlling which VPN groups users are authori...

Hi,We are doing a rollout for a new WAN network for  a private company. We configured the VPN tunnels using certificates  and the certificates are issued by a WIndows 2008 server using SCEP.  The certificates are valid for a year , we tried to config...