VPN

Hello!As a pandemic consequence most users are working remotely and they are connected by VPN remote access.Another consequence are the increasing number of tickets from users claim about quality of their VPN connections.Have anyone had already deplo...

Hi everyone,  due to Covid19, my customers are using much more the VPN than previous time.I have many Cisco RV340-K9 (hardware from V01 to V04)devices located on different customers, all with firmware from  1.0.03.16 to 1.0.03.17 (latest one at the m...

Good Morning,When our users are at work, they can access the internet and the network status icon shows they are on the internet. When our users are at home and on the VPN, they can access the internet but the network status icon shows they do not ha...

I have a really weird problem with Anyconnect v4.10.00093 and clients trying to connect. The problem is that i can't connect to the ASA based on the IP address, however if i edit the host file in the Windows 10 client and add like 201.1.14.1 test.tes...

Good afternoon,This was interesting, here's the scenario (See attached picture for topology): We have a site to site VPN and we have the same topology and configuration on both sites:- Firewall HA Pair configuration- Switches with HSRP with 3 vlans T...

HI There, I am testing the always on feature for my company for the remote workers who are issued company laptops, management want all users to be on the VPN when using the company laptop. I enabled always on and it seems to work however i have 3 oth...

I am very new to firewalls and am currently implementing a VPN between two 5505 (I try 5506 as well) with the following configurations for one side and the corresponding configs to the other side. Currently am unable to ping from inside to the other ...

Hello, Please help me I want to configure a vpn site to site with a partner but he doesn't use Private IP as remote.So i configure the VPN with a public IP as a protected network.and i configure the NAT to match with this Public IP and the remote net...

Have a 5512 w/ a working AnyConnect integration w/ LDAP to 2 local domain controllers.  Setting up 2 new domain controllers in another site (across a site to site tunnel terminated on this ASA) and I've added them to the ASA in the same LDAP group.  ...

Between the ISR Router ISR4331, I have configured IKEv2, but the tunnel comes up.Setup like HUb and spokein the HUb router more than 35 tunnels are there, am facing issue with only one site. Logs collected from spoke router :Apr 15 12:32:03.188: IKEv...

I suffer from intermittent outages while working from home on my home network, sometimes the outages are very small and affect WiFi only.The cisco VPN will then try to reconnect, and keeps throwing up an anyconnect browser popup window at an IP addre...