VPN

Hi,A design question for the following requirement:Company A will provide network management for different SMB customers for their Cisco Callmanager express systems. In Company A there is a Cisco VPN Concentrator; My question is on those remote custo...

Good day guys,I've got a problem.i have to set up a ipsec tunnel with a partner, but the partner wil not use our local subnet, instead he give us the ip address 1.1.1.1 /32I can use the loopback interface, buti can't do the command "crypto map local ...

Can the uplink port to a Cisco VPN 3000 be trunked? I want to create multiple user groups and assign them to different vlans

VPN client left two hours with no traffic. Tunnel collapsed although configured incident time out. SHOW TECH and selected SYSLOG outputs attached.Customer says it is not necessarily 2 hours all the time. So time idle connections can time out in 40 mi...

I have a user who is connecting via VPN to a 2800 series router. One day the VPN client started acting weird. After initializing the software, the VPN window would pop up for 3 seconds (start the initiation process) and then collapse with the bottom ...

By default CSA detects when a new program is being installed and queries the user 'are you trying to install a new application'As you can see, the first event denies rp505enu.exe to invoke its own setup files in a temp directory while the second rule...

is there a vpn client that supports windows vista?

Hi,i'm using IPSec+OSPF. There're the two possible solutions for protocol/transprot using Tunnel Interfaces:a) GRE/IP with crypto-map, orb) IPSEC/IP with crypto ipsec profileWhat are the advantage/disadvantage using a) or b)...?My main connection is ...

Hi guys,i'm new users and simple user cisco :-)I would want to know, as I can setup the router in subject in order to make them to work like Access Concentrator in order to authenticate 1000 users using freeradius? You can give to me of the link wher...

On a Cisco3845 a NM-2CE1/T1-PRI and a NM-30DM installed and configured for dialup access router. IOS is 12.4 version with advanced Enterprise feature. I found that even though E1 lines were answered but the NM-30DM did not provide Medem functions and...

Today is the first day I heard of the producted called "2511 RJ"Obviously, I want to setup the lab so the two schools can share the equipment . Q: Does Cisco 2511 RJ require dialup modem? The two schools locate on adifferent continent, so dialup is a...

HelloJust setup a pix 501 for a client and need the vpn client software. I have an older version but I was hoping someone could tell me if this is software is a free download and if so provide a link.Thanks in advance!

Hi, I want to know if it's possible on a ASA to use the same IP on the LAN and on the VPN. My user has actually a fixed ip on the LAN and I would like to reuse the same IP when they are connect to the VPN.The target is to allowed/restric the same thi...

Friends, I have a 1812 at HO with WIC1 BS/T Card, connected it to an ISDN BRI line.One of my critical remote location uses Leased circuit to reach my HO Router.But in case if LL goes down,some of the important PC's at the remote site should b...

Hi all can i make a vpn using my home dsl router and a pix 501 firewall behind it, I only have 1 address, can i use port forwarding to the pix 501 for vpn, and how would i do this ?