VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

All,I have a client that is having issues with Outlook 2003 SP2 across a VPN client connection. The users disconnect from Outlook over time and the Exchange log shows them to have exhausted their default MAPI sessions (32). The user cannot connect to...

I am deploying many Cisco 851 routers to various sites, and connecting these back to my network via GRE over IPSEC VPNs. The 851's will have dynamic IPs (as you can see via the config below). I'm also NATing remotely at the 851. Works great. Howe...

kclark by Level 1
  • 3377 Views
  • 5 replies
  • 0 Helpful votes

I wish to allow ping through my ASA5520 to inside machine. and tried to permit icmp from my outside machine to my inside machine on both direction and on interface outside and inside. But, it still have me error:%ASA-3-...: Deny inbound icmp src outs...

julxu by Level 1
  • 1134 Views
  • 1 replies
  • 0 Helpful votes

I have set up a remote access VPN between a Cisco ASA 5510 and a remote access client. The VPN successfully connects, but no network traffic is able to be passed. I have attached my configuration. Any help would be greatly appreciated.

Hello, I have a client VPNing into the corporate network and in the pool 10.10.100.x. Client is using internal DNS servers since they have to access private servers. They are also setup with split tunneling so as to use their own internet conenctio...

aalang by Level 1
  • 495 Views
  • 3 replies
  • 0 Helpful votes

What is the best way to resolve having so many peers with ASA and non Cisco firewalls. I have a customer with a number of Watchguard and Sonicwall firewalls sites (Up to 10) and we are looking for the best solution to not have to statically enter in ...

Aaron D by Level 1
  • 719 Views
  • 3 replies
  • 0 Helpful votes

I've searched around the forums looking for an answer to my problem but have yet to find anything so I figured I would go ahead and post my issue. I'm able to connect to the VPN and it prompts me for my username/password but I can't ping any devices...

mdyoung by Level 1
  • 373 Views
  • 1 replies
  • 0 Helpful votes

I need to build a lan-to-lan VPN tunnel between two networks having overlapping IP spaces. I've looked at the config guide: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml#diag ... but I am unable ...

jpiazza by Level 1
  • 358 Views
  • 1 replies
  • 0 Helpful votes

I need to know if anyone has had experience using a lan-to-lan Linksys VPN router (RV042 or similar) to an 7204 router VPN router? What experiences have you had? How is reliability of the Linksys VPN router (mean time, IPSec tunnel drops)? And any ot...

jliscano by Level 1
  • 786 Views
  • 4 replies
  • 0 Helpful votes

Why is it that on an SSL module, certificate validity dates are different when cheking "show crypto ca trustpoints" and "show ssl-proxy certificate-history" ?Doesn't the "certificate-history" show the current one as well?Which one should be tracked f...

kmlh by Level 1
  • 514 Views
  • 0 replies
  • 0 Helpful votes

Hi,I have a PIX 525 at my main site and a 1721 router at a remote location. I used the PDM and SDM to set up an IPSec site-to-site VPN connection. In my private network, I use 10.1.0.0/16 for the main site and 10.x.0.0/16 (where x=2 through 47) for t...